Re: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

looks good for me.

Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>

Thanks,
JB


From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
Sent: Wednesday, September 27, 2023 19:32
To: jic23@xxxxxxxxxx <jic23@xxxxxxxxxx>; lars@xxxxxxxxxx <lars@xxxxxxxxxx>; robh+dt@xxxxxxxxxx <robh+dt@xxxxxxxxxx>; krzysztof.kozlowski+dt@xxxxxxxxxx <krzysztof.kozlowski+dt@xxxxxxxxxx>; conor+dt@xxxxxxxxxx <conor+dt@xxxxxxxxxx>; bcousson@xxxxxxxxxxxx <bcousson@xxxxxxxxxxxx>; tony@xxxxxxxxxxx <tony@xxxxxxxxxxx>; andreas@xxxxxxxxxxxx <andreas@xxxxxxxxxxxx>; chenhuiz@xxxxxxxx <chenhuiz@xxxxxxxx>; Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>; andy.shevchenko@xxxxxxxxx <andy.shevchenko@xxxxxxxxx>; linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx <devicetree@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>; linux-omap@xxxxxxxxxxxxxxx <linux-omap@xxxxxxxxxxxxxxx>
Subject: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag 
 
Some boards fail in magnetometer probe if level shifter flag is not set, definition was found in the vendor Linux kernel v3. 0. Signed-off-by: Andreas Kemnade <andreas@ kemnade. info> Reviewed-by: Andy Shevchenko <andy. shevchenko@ gmail. com> 
ZjQcmQRYFpfptBannerStart
This Message Is From an External Sender 
This message came from outside your organization. 
 
ZjQcmQRYFpfptBannerEnd
Some boards fail in magnetometer probe if level shifter flag is not set,
definition was found in the vendor Linux kernel v3.0.

Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c  | 13 +++++++++++++
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c |  3 +++
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  |  1 +
 3 files changed, 17 insertions(+)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
index 7327e5723f961..8a7f2911905af 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
@@ -71,6 +71,19 @@ int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
 	unsigned int val;
 	int ret;
 
+	/*
+	 * Code based on the vendor Linux kernel v3.0,
+	 * the exact meaning is unknown.
+	 */
+	if (st->chip_type == INV_MPU9150) {
+		unsigned int mask = BIT(7);
+
+		val = st->level_shifter ? mask : 0;
+		ret = regmap_update_bits(st->map, 0x1, mask, val);
+		if (ret)
+			return ret;
+	}
+
 	/* configure i2c master */
 	val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
 			INV_MPU6050_BIT_WAIT_FOR_ES;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 29f906c884bd8..3fbeef1a70186 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -17,6 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 
 #include <linux/iio/common/inv_sensors_timestamp.h>
 #include <linux/iio/iio.h>
@@ -1495,6 +1496,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 	st->irq = irq;
 	st->map = regmap;
 
+	st->level_shifter = device_property_read_bool(dev,
+						      "invensense,level-shifter");
 	pdata = dev_get_platdata(dev);
 	if (!pdata) {
 		result = iio_read_mount_matrix(dev, &st->orientation);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index ed5a96e78df05..7eba1439c8093 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -203,6 +203,7 @@ struct inv_mpu6050_state {
 	s32 magn_raw_to_gauss[3];
 	struct iio_mount_matrix magn_orient;
 	unsigned int suspended_sensors;
+	bool level_shifter;
 	u8 *data;
 };
 
-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux