Re: [PATCH v4 9/9] arm64: dts : ti: k3-am69-sk: Add DDR carveout memory nodes for C71x DSP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 9/6/2023 4:54 PM, Apurva Nandan wrote:
Two carveout reserved memory nodes each have been added for each of the
C71x DSP for the TI K3 AM69 SK boards. These nodes are assigned to the
respective rproc device nodes as well. The first region will be used as
the DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.

The current carveout addresses and sizes are defined statically for each
device. The C71x DSP processor supports a MMU called CMMU, but is not
currently supported and as such requires the exact memory used by the
firmware to be set-aside.

Signed-off-by: Sinthu Raja <sinthu.raja@xxxxxx>
Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
---
  arch/arm64/boot/dts/ti/k3-am69-sk.dts | 104 ++++++++++++++++++++++++++
  1 file changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index d5a39caf15af..1e6fb082d3d2 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -143,6 +143,54 @@ main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
  			reg = <0x00 0xa7100000 0x00 0xf00000>;
  			no-map;
  		};

Reviewed by: Udit Kumar<u-kumar1@xxxxxx>

[...]




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux