On Thu, 14 Sept 2023 at 12:59, Yang Chen <yangchen.openbmc@xxxxxxxxx> wrote:
>
> Add linux device tree entry related to the Minerva Chassis Management
> Controller (CMC) specific devices connected to the Aspeed SoC (AST2600).
>
> Signed-off-by: Yang Chen <yangchen.openbmc@xxxxxxxxx>
Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
There was one warning when building. Please double check your code
compiles cleanly before submitting:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts:91.24-94.4:
Warning (i2c_bus_reg):
/ahb/apb/bus@1e78a000/i2c-bus@100/temperature-sensor@4B: I2C bus unit
address format error, expected "4b"
I've fixed that and added your patch to the aspeed tree for 6.7.
> ---
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../aspeed-bmc-facebook-minerva-cmc.dts | 265 ++++++++++++++++++
> 2 files changed, 266 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
>
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index 23cbc7203a8e..d3ac20e316d0 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-facebook-fuji.dtb \
> aspeed-bmc-facebook-galaxy100.dtb \
> aspeed-bmc-facebook-greatlakes.dtb \
> + aspeed-bmc-facebook-minerva-cmc.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> aspeed-bmc-facebook-wedge40.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
> new file mode 100644
> index 000000000000..3c389fdf58a5
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
> @@ -0,0 +1,265 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2023 Facebook Inc.
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> + model = "Facebook Minerva CMC";
> + compatible = "facebook,minerva-cmc", "aspeed,ast2600";
> +
> + aliases {
> + serial5 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = "serial5:57600n8";
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x80000000>;
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
> + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
> + <&adc1 2>;
> + };
> +};
> +
> +&uart6 {
> + status = "okay";
> +};
> +
> +&wdt1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> + aspeed,reset-type = "soc";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> + aspeed,ext-pulse-duration = <256>;
> +};
> +
> +&mac3 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii4_default>;
> + use-ncsi;
> + mlx,multi-host;
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-128.dtsi"
> + };
> + flash@1 {
> + status = "okay";
> + m25p,fast-read;
> + label = "alt-bmc";
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&sgpiom1 {
> + status = "okay";
> + ngpios = <128>;
> + bus-frequency = <2000000>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + temperature-sensor@4B {
> + compatible = "ti,tmp75";
> + reg = <0x4B>;
> + };
> +
> + eeprom@51 {
> + compatible = "atmel,24c128";
> + reg = <0x51>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + i2c-mux@77 {
> + compatible = "nxp,pca9548";
> + reg = <0x77>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + i2c-mux-idle-disconnect;
> +
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c128";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c128";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c128";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c128";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@4 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <4>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c128";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@5 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <5>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c128";
> + reg = <0x50>;
> + };
> + };
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};
> +
> +&i2c8 {
> + status = "okay";
> +};
> +
> +&i2c9 {
> + status = "okay";
> +};
> +
> +&i2c10 {
> + status = "okay";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +};
> +
> +&i2c12 {
> + status = "okay";
> +};
> +
> +&i2c13 {
> + status = "okay";
> +};
> +
> +&i2c14 {
> + status = "okay";
> + multi-master;
> +
> + ipmb@10 {
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c15 {
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c128";
> + reg = <0x50>;
> + };
> +};
> +
> +&adc0 {
> + aspeed,int-vref-microvolt = <2500000>;
> + status = "okay";
> + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> + &pinctrl_adc2_default &pinctrl_adc3_default
> + &pinctrl_adc4_default &pinctrl_adc5_default
> + &pinctrl_adc6_default &pinctrl_adc7_default>;
> +};
> +
> +&adc1 {
> + aspeed,int-vref-microvolt = <2500000>;
> + status = "okay";
> + pinctrl-0 = <&pinctrl_adc10_default>;
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&uhci {
> + status = "okay";
> +};
> --
> 2.34.1
>
