On 26.09.2023 18:51, Stephan Gerhold wrote:
> Enable sound and modem for the Samsung S4 Mini Value Edition. The setup
> is similar to most MSM8916 devices, i.e.:
>
> - QDSP6 audio
> - Speaker/earpiece/headphones/microphones via digital/analog codec in
> MSM8916/PM8916
> - WWAN Internet via BAM-DMUX
>
> except:
>
> - Samsung-specific audio jack detection (not supported yet)
>
> Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> index 68da2a2d3077..5f33aa0ad7b5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> @@ -6,6 +6,8 @@
> /dts-v1/;
>
> #include "msm8916-pm8916.dtsi"
> +#include "msm8916-modem-qdsp6.dtsi"
> +
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> @@ -319,6 +321,10 @@ &blsp_uart2 {
> status = "okay";
> };
>
> +&mpss_mem {
> + reg = <0x0 0x86800000 0x0 0x5a00000>;
> +};
> +
> &pm8916_resin {
> status = "okay";
> linux,code = <KEY_VOLUMEDOWN>;
> @@ -350,6 +356,14 @@ &sdhc_2 {
> no-1-8-v;
> };
>
> +&sound {
> + status = "okay";
> + audio-routing =
> + "AMIC1", "MIC BIAS External1",
> + "AMIC2", "MIC BIAS Internal2",
> + "AMIC3", "MIC BIAS External1";
> +};
I *think* we should be able to harmlessly enable &audio globally?
Konrad
