On 26.09.2023 18:20, Nitin Rawat wrote:
> Add UFS host controller and PHY nodes for sc7280 IDP board.
>
> Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 2ff549f4dc7a..a0059527d9e4 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -499,6 +499,25 @@
> status = "okay";
> };
>
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
> + vcc-supply = <&vreg_l7b_2p9>;
> + vcc-max-microamp = <800000>;
> + vccq-supply = <&vreg_l9b_1p2>;
> + vccq-max-microamp = <900000>;
> + vccq2-supply = <&vreg_l9b_1p2>;
> + vccq2-max-microamp = <900000>;
Can you confirm VCCQ2 is in fact connected, to avoid the mistake
fixed in [1]?
Konrad
[1] https://lore.kernel.org/linux-arm-msm/20230906104744.163479-1-krzysztof.kozlowski@xxxxxxxxxx/#b
