Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Adding additionalProperties constraint on 'trig-conns' nodes results in
warnings that 'cpu' and 'arm,cs-dev-assoc' are not allowed. These are
already defined for the parent node, but need to be duplicated for the
child node. Drop the free form description that the properties also apply
to the child nodes.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/arm/arm,coresight-cti.yaml | 33 ++++++++++++++-----
1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
index b9bdfc8969cd..2d5545a2b49c 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -93,9 +93,7 @@ properties:
cpu:
description:
- Handle to cpu this device is associated with. This must appear in the
- base cti node if compatible string arm,coresight-cti-v8-arch is used,
- or may appear in a trig-conns child node when appropriate.
+ Handle to cpu this CTI is associated with.
power-domains:
maxItems: 1
@@ -112,12 +110,12 @@ properties:
description:
defines a phandle reference to an associated CoreSight trace device.
When the associated trace device is enabled, then the respective CTI
- will be enabled. Use in a trig-conns node, or in CTI base node when
- compatible string arm,coresight-cti-v8-arch used. If the associated
- device has not been registered then the node name will be stored as
- the connection name for later resolution. If the associated device is
- not a CoreSight device or not registered then the node name will remain
- the connection name and automatic enabling will not occur.
+ will be enabled. Use in CTI base node when compatible string
+ arm,coresight-cti-v8-arch used. If the associated device has not been
+ registered then the node name will be stored as the connection name for
+ later resolution. If the associated device is not a CoreSight device or
+ not registered then the node name will remain the connection name and
+ automatic enabling will not occur.
# size cells and address cells required if trig-conns node present.
"#size-cells":
@@ -129,6 +127,8 @@ properties:
patternProperties:
'^trig-conns@([0-9]+)$':
type: object
+ additionalProperties: false
+
description:
A trigger connections child node which describes the trigger signals
between this CTI and another hardware device. This device may be a CPU,
@@ -140,6 +140,21 @@ patternProperties:
reg:
maxItems: 1
+ cpu:
+ description:
+ Handle to cpu this trigger connection is associated with.
+
+ arm,cs-dev-assoc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ defines a phandle reference to an associated CoreSight trace device.
+ When the associated trace device is enabled, then the respective CTI
+ will be enabled. If the associated device has not been registered
+ then the node name will be stored as the connection name for later
+ resolution. If the associated device is not a CoreSight device or
+ not registered then the node name will remain the connection name
+ and automatic enabling will not occur.
+
arm,trig-in-sigs:
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
--
2.40.1
