Le lundi 25 septembre 2023 à 19:21 +1000, John Watts a écrit : > On Mon, Sep 25, 2023 at 11:12:29AM +0200, Paul Cercueil wrote: > > Hi John, > > > > Just to be sure, your fascontek panel won't work with the > > initialization sequence of the leadtek panel? > > Yes, it does work. OK, why not use the leadtek's initialization sequence then? >From what I can see, you have a panel with a NV3052C chip, so the existing initialization sequence should already work. > > > Did you try with the existing display modes? If you can afford the > > 24 > > MHz clock (and if it works with your panel) it will give you a > > perfect > > 60.0 Hz refresh rate, while this mode above will give you above > > 59.93 > > Hz (which is not that bad though). > > No I didn't test with this. > > In general I don't feel comfortable submitting code that strays from > what is > recommended by the manufacturer. The NV3052C datasheet does not give any settings for a 640x480 panel, I only see suggested settings for a 720x1280 vertical panel. Unless you have a min/max range specified, the values you see in there are only suggestions for a working setup, that doesn't mean they are the only recommended ones. Cheers, -Paul
