[PATCH v22 04/16] PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



dw_pcie_setup() is already setting PCI_EXP_LNKCAP_MLW to pcie->num_lanes
in the PCI_EXP_LNKCAP register for programming maximum link width.

Hence, remove the redundant setting here.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230825093219.2685912-9-yoshihiro.shimoda.uh@xxxxxxxxxxx
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@xxxxxxxxxx>
Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Jonathan Hunter <jonathanh@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 4bba31502ce1..2debdf1a0b52 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -917,12 +917,6 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)
 		AMBA_ERROR_RESPONSE_CRS_SHIFT);
 	dw_pcie_writel_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT, val);
 
-	/* Configure Max lane width from DT */
-	val = dw_pcie_readl_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKCAP);
-	val &= ~PCI_EXP_LNKCAP_MLW;
-	val |= (pcie->num_lanes << PCI_EXP_LNKSTA_NLW_SHIFT);
-	dw_pcie_writel_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKCAP, val);
-
 	/* Clear Slot Clock Configuration bit if SRNS configuration */
 	if (pcie->enable_srns) {
 		val_16 = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base +
-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux