On Thu, Aug 31, 2023 at 06:51:26AM -0500, Adam Ford wrote: > The baseboard has a connector for a pulse density microphone. > This is connected via the micfil interface and uses the DMIC > audio codec with the simple-audio-card. > > Signed-off-by: Adam Ford <aford173@xxxxxxxxx> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi > index 313e93663d6f..d0dd4c81a557 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi > @@ -6,6 +6,13 @@ > #include <dt-bindings/phy/phy-imx8-pcie.h> > > / { > + > + dmic_codec: dmic-codec { > + compatible = "dmic-codec"; > + num-channels = <1>; > + #sound-dai-cells = <0>; > + }; > + > leds { > compatible = "gpio-leds"; > > @@ -98,6 +105,22 @@ reg_usdhc2_vmmc: regulator-usdhc2 { > enable-active-high; > }; > > + sound-dmic { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "dmic"; > + simple-audio-card,format = "pdm"; > + simple-audio-card,bitclock-master = <&dailink_master>; > + simple-audio-card,frame-master = <&dailink_master>; > + > + dailink_master: simple-audio-card,cpu { > + sound-dai = <&micfil>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&dmic_codec>; > + }; > + }; > + > sound-wm8962 { > compatible = "simple-audio-card"; > simple-audio-card,name = "wm8962"; > @@ -228,6 +251,16 @@ pca6416_1: gpio@21 { > }; > }; > > +&micfil { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pdm>; > + assigned-clocks = <&clk IMX8MM_CLK_PDM>; > + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; > + assigned-clock-rates = <49152000>; > + status = "okay"; We usually end property list with 'status'. Shawn > + #sound-dai-cells = <0>; > +}; > + > &mipi_csi { > status = "okay"; > ports { > @@ -365,6 +398,13 @@ MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 > >; > }; > > + pinctrl_pdm: pdmgrp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI5_RXC_PDM_CLK 0xd6 > + MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0 0xd6 > + >; > + }; > + > pinctrl_reg_usb_otg1: usbotg1grp { > fsl,pins = < > MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 > -- > 2.39.2 >