On Mon, Sep 25, 2023 at 9:07 AM Shawn Guo <shawnguo@xxxxxxxxxx> wrote:
>
> On Wed, Aug 30, 2023 at 11:44:29PM -0500, Adam Ford wrote:
> > The i.MX8MP has an asynchronous sample rate converter which seems
> > to be the same as what is available on the i.MX8M Nano.
> >
> > Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> > ---
> > V3: No Change. The dt-binding update was already accepted into the sound tree, so that patch
> > was dropped from the series
> >
> > V2: No Change.
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 83d907294fbc..3167706d81e1 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1459,6 +1459,26 @@ sai7: sai@30c80000 {
> > interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> > status = "disabled";
> > };
> > +
> > + easrc: easrc@30c90000 {
> > + compatible = "fsl,imx8mp-easrc", "fsl,imx8mn-easrc";
> > + reg = <0x30c90000 0x10000>;
> > + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_ASRC_IPG>;
> > + clock-names = "mem";
> > + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
> > + <&sdma2 18 23 0> , <&sdma2 19 23 0>,
> > + <&sdma2 20 23 0> , <&sdma2 21 23 0>,
> > + <&sdma2 22 23 0> , <&sdma2 23 23 0>;
> > + dma-names = "ctx0_rx", "ctx0_tx",
> > + "ctx1_rx", "ctx1_tx",
> > + "ctx2_rx", "ctx2_tx",
> > + "ctx3_rx", "ctx3_tx";
> > + firmware-name = "imx/easrc/easrc-imx8mn.bin";
> > + fsl,asrc-rate = <8000>;
>
> One space before =
I fixed it up and applied, thanks!
