On Thu, Aug 31, 2023 at 08:18:50PM +0200, Marek Vasut wrote: > Describe VDD_ARM (BUCK2) run and standby voltage in DT. > > Signed-off-by: Marek Vasut <marex@xxxxxxx> > --- > Cc: Conor Dooley <conor+dt@xxxxxxxxxx> > Cc: Fabio Estevam <festevam@xxxxxxxxx> > Cc: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> > Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> > Cc: Magnus Damm <magnus.damm@xxxxxxxxx> > Cc: Marek Vasut <marex@xxxxxxx> > Cc: NXP Linux Team <linux-imx@xxxxxxx> > Cc: Peng Fan <peng.fan@xxxxxxx> > Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > Cc: Shawn Guo <shawnguo@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > --- > arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts > index 13674dc64be9d..d98a040860a48 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts > @@ -362,6 +362,8 @@ buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */ > }; > > buck2: BUCK2 { /* VDD_ARM */ > + nxp,dvs-run-voltage = <950000>; > + nxp,dvs-standby-voltage = <850000>; Buck2 is not turned off in DSM on i.MX8MP? Shawn > regulator-min-microvolt = <850000>; > regulator-max-microvolt = <1000000>; > regulator-ramp-delay = <3125>; > -- > 2.40.1 >