On Mon, 18 Sep 2023 00:11:42 +0300 Ivan Mikhaylov <fr0st61te@xxxxxxxxx> wrote: > The i2c driver with Rsense option for current monitoring. > > Signed-off-by: Ivan Mikhaylov <fr0st61te@xxxxxxxxx> Hi Ivan, Welcome to IIO! Looks good, but there are a few things I'd add to make this describe the device a little more fully and flexibly. Ideally we want a binding to fully describe a device, even if the particular driver for Linux doesn't use all the features. Some are easy though such as enabling regulators (that are probably turned on already on your board) Thanks, Jonathan > --- > .../bindings/iio/adc/maxim,max34408.yaml | 63 +++++++++++++++++++ > 1 file changed, 63 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml > new file mode 100644 > index 000000000000..ae7c6ddb13d8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml > @@ -0,0 +1,63 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Two- and four-channel current monitors with overcurrent control. > + > +maintainers: > + - Ivan Mikhaylov <fr0st61te@xxxxxxxxx> > + > +description: | > + The MAX34408/MAX34409 are two- and four-channel current monitors that are > + configured and monitored with a standard I2C/SMBus serial interface. Each > + unidirectional current sensor offers precision high-side operation with a > + low full-scale sense voltage. The devices automatically sequence through > + two or four channels and collect the current-sense samples and average them > + to reduce the effect of impulse noise. The raw ADC samples are compared to > + user-programmable digital thresholds to indicate overcurrent conditions. > + Overcurrent conditions trigger a hardware output to provide an immediate > + indication to shut down any necessary external circuitry. > + > + Specifications about the devices can be found at: > + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf > + > +properties: > + compatible: > + enum: > + - maxim,max34408 > + - maxim,max34409 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + maxim,rsense-val-micro-ohms: >From the datasheet you link, it looks like this could be different for the inputs? > + description: > + Adjust the Rsense value to monitor higher or lower current levels. > + enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000] These come from Table 18 which is example values I think? Not sure there is anything limiting us to those particular values given the equation given just above that table should apply more generally. > + default: 1000 Please add regulator definitions. supply-vdd: true and add it to the required properties. It might be provided by a stub regulator but we still list that as required. Also good to add bindings for the other control pins that might be wired to be in the binding from the start - no need for the driver to use them though. Looks like we have SHTDN and ENA here that could be wired to GPIOs on the host. > + > +required: > + - compatible > + - reg > + - maxim,rsense-val-micro-ohms > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@1e { > + compatible = "maxim,max34409"; > + reg = <0x1e>; > + maxim,rsense-val-micro-ohms = <1000>; > + }; > + };
