Re: [PATCH 2/2] iio: adc: Add driver support for MAX34408/9

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Looks very good. Few small comments.

On 9/17/23 14:11, Ivan Mikhaylov wrote:
[...]
+static int max34408_read_adc_avg(struct max34408_data *max34408, int channel, int *val)
+{
+	unsigned long ctrl;
Should be unsigned int so its compatible with the regmap API and you do not have to cast. Otherwise you'll run into trouble where long is 64 bit.
+	int rc;
+	u8 tmp;
+
+	mutex_lock(&max34408->lock);
+	rc = regmap_read(max34408->regmap, MAX34408_CONTROL, (u32 *)&ctrl);
+	if (rc)
+		goto err_unlock;
+
+	/* set averaging (0b100) default values*/
+	tmp = ctrl;
+	set_bit(CONTROL_AVG2, &ctrl);
+	clear_bit(CONTROL_AVG1, &ctrl);
+	clear_bit(CONTROL_AVG0, &ctrl);

While using set and clear_bit is not wrong these are the atomic versions. There is __{set,clear}_bit as the non atomic version. But in my opinion is fine to just use |= and &= here.


+	rc = regmap_write(max34408->regmap, MAX34408_CONTROL, ctrl);
+	if (rc) {
+		dev_err(max34408->dev,
+			"Error (%d) writing control register\n", rc);
+		goto err_unlock;
+	}
+
+	rc = max34408_read_adc(max34408, channel, val);
+	if (rc)
+		goto err_unlock;
+
+	/* back to old values */
+	rc = regmap_write(max34408->regmap, MAX34408_CONTROL, tmp);
+	if (rc)
+		dev_err(max34408->dev,
+			"Error (%d) writing control register\n", rc);
+
+err_unlock:
+	mutex_unlock(&max34408->lock);
+
+	return rc;
+}
+
+static int max34408_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct max34408_data *max34408 = iio_priv(indio_dev);
+	int rc;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+	case IIO_CHAN_INFO_AVERAGE_RAW:
+		rc = max34408_read_adc_avg(max34408, chan->channel,
+					   val);
+		if (rc)
+			return rc;
+
+		if (mask == IIO_CHAN_INFO_PROCESSED) {


Usually we only have either raw + offset and scale or processed. In this case I'd go with raw + scale and offset since it is a linear transformation. processed is usually only used when the transformation is non linear.

+			/*
+			 * calcluate current for 8bit ADC with Rsense
+			 * value.
+			 * 10 mV * 1000 / Rsense uOhm = max current
+			 * (max current * adc val * 1000) / (2^8 - 1) mA
+			 */
+			*val = DIV_ROUND_CLOSEST((10000 / max34408->rsense) *
+						 *val * 1000, 256);
+		}
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_RAW:
+		rc = max34408_read_adc(max34408, chan->channel, val);
+		if (rc)
+			return rc;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info max34408_info = {
+	.read_raw	= max34408_read_raw,
+};
+
+static int max34408_probe(struct i2c_client *client)
+{
+	struct device_node *np = client->dev.of_node;
+	struct max34408_data *max34408;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int rc;
+
+	regmap = devm_regmap_init_i2c(client, &max34408_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "regmap_init failed\n");
There is a the dev_err_probe function, which has the advantage of having a unified formatting for the error message style.
+		return PTR_ERR(regmap);
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*max34408));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	max34408 = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	max34408->regmap = regmap;
+	max34408->dev = &client->dev;
+	mutex_init(&max34408->lock);
+	rc = device_property_read_u32(&client->dev,
+				      "maxim,rsense-val-micro-ohms",
+				      &max34408->rsense);
+	if (rc)
+		return -EINVAL;
+
+	/* disable ALERT and averaging */
+	rc = regmap_write(max34408->regmap, MAX34408_CONTROL, 0x0);
+	if (rc)
+		return rc;
+
+	if (of_device_is_compatible(np, "maxim,max34408")) {
Instead of using of_device_is_compatible it is usually preferred to assign some sort of chip_data struct to the data field of the of the compatible array. This makes it both easier to add new chips and also other ways to instantiate the device besides devicetree.
+		indio_dev->channels = max34408_channels;
+		indio_dev->num_channels = ARRAY_SIZE(max34408_channels);
+		indio_dev->name = "max34408";
+	} else if (of_device_is_compatible(np, "maxim,max34409")) {
+		indio_dev->channels = max34409_channels;
+		indio_dev->num_channels = ARRAY_SIZE(max34409_channels);
+		indio_dev->name = "max34409";
+	}
+	indio_dev->info = &max34408_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->dev.of_node = np;
The assignment of of_node should not be needed, the IIO core will take care of this.
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux