v4: rename basename to blackarmor-nas220 use "Seagate Blackarmor NAS220" as model name use node references instead of repeating the bus structure separate nodes with blank lines adt7476's node name reflects device function (i.e. thermal) reduce button labels to "Reset" and "Power" use GPIO_ACTIVE_LOW for regulator's gpio property v3: documented UART pinout in dts v2: indent with tabs only removed NAND layout Evgeni Dobrev (1): add support for Seagate BlackArmor NAS220 arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts | 172 ++++++++++++++++++++++ 2 files changed, 173 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
