From: Fabio Estevam <festevam@xxxxxxx>
mxs-pwm.yaml documents that #pwm-cells should be 3.
This is correct as the last cell may indicate the PWM polarity.
Convert all mxs devicetree files to using #pwm-cells = <3> for
consistency.
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
Changes since v1:
- Newly introduced. Change mxs DT's to use #pwm-cells = <3>. (Uwe)
arch/arm/boot/dts/nxp/mxs/imx23-evk.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx23.dtsi | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-evk.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts | 2 +-
arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 2 +-
15 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts
index 3b609d987d88..7365fe4581a3 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts
@@ -137,7 +137,7 @@ usb0: usb@80080000 {
backlight_display: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 2 5000000>;
+ pwms = <&pwm 2 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
index 46057d9bf555..636cf09a2b37 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -166,7 +166,7 @@ reg_vdd_tuner: regulator-vdd-tuner0 {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 2 5000000>;
+ pwms = <&pwm 2 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
index b1d8210f3ecc..28341d8315c2 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
@@ -153,7 +153,7 @@ reg_vddio_sd0: regulator-vddio-sd0 {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 2 5000000>;
+ pwms = <&pwm 2 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index 5eca942a52fd..2bb68fc954b9 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -561,7 +561,7 @@ pwm: pwm@80064000 {
compatible = "fsl,imx23-pwm";
reg = <0x80064000 0x2000>;
clocks = <&clks 30>;
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
fsl,pwm-number = <5>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
index fd6fee63ad2f..6c87266eb135 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
@@ -39,7 +39,7 @@ user {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 191000>;
+ pwms = <&pwm 3 191000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
index 953e3162d2d2..f0ce897b9d5c 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
@@ -173,7 +173,7 @@ rotary {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>;
+ pwms = <&pwm 3 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts
index 70e225a99fbe..cb68edd6101b 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts
@@ -39,7 +39,7 @@ hx8357: hx8357@0 {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>;
+ pwms = <&pwm 3 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
index 0be7356941ee..5875c3d7ba97 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
@@ -26,7 +26,7 @@ reg_usb1_vbus: regulator-0 {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 4 5000000>;
+ pwms = <&pwm 4 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
index aae0f1801461..b414e67ef379 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
@@ -26,7 +26,7 @@ reg_usb1_vbus: regulator-0 {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>;
+ pwms = <&pwm 3 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
index 6633cde305e5..652fc9e57a55 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
@@ -14,7 +14,7 @@ / {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 4 1000000>;
+ pwms = <&pwm 4 1000000 0>;
brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
default-brightness-level = <10>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
index 783abb82b2a8..9ebb7371e235 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
@@ -117,7 +117,7 @@ user {
backlight_display: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 2 5000000>;
+ pwms = <&pwm 2 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
index 8241c2d159fa..34b4d3246db1 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
@@ -17,7 +17,7 @@ memory@40000000 {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>;
+ pwms = <&pwm 3 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
index 6bf26f386a5e..13070ca08cff 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
@@ -13,7 +13,7 @@ / {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 4 5000000>;
+ pwms = <&pwm 4 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
index 23ad7cd0a1de..0391ffd15866 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
@@ -131,7 +131,7 @@ user_led: user {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 500000>;
+ pwms = <&pwm 0 500000 0>;
/*
* a silly way to create a 1:1 relationship between the
* PWM value and the actual duty cycle
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 763adeb995ee..01ddd1ab5354 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -1185,7 +1185,7 @@ pwm: pwm@80064000 {
compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
reg = <0x80064000 0x2000>;
clocks = <&clks 44>;
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
fsl,pwm-number = <8>;
status = "disabled";
};
--
2.34.1
