Re: [PATCH v6 18/19] PCI: starfive: Add JH7110 PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2023/9/19 19:34, Emil Renner Berthing wrote:
> Minda Chen wrote:
>>
>>
>> On 2023/9/18 6:13, Emil Renner Berthing wrote:
>> > Minda Chen wrote:
>> >> Add StarFive JH7110 SoC PCIe controller platform
>> >> driver codes, and add host init/deinit to pcie-plda-host.c
>> >>
>> >> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
>> >> Co-developed-by: Kevin Xie <kevin.xie@xxxxxxxxxxxxxxxx>
>> >> Reviewed-by: Mason Huo <mason.huo@xxxxxxxxxxxxxxxx>
>> >> ---
>> >>  MAINTAINERS                                  |   7 +
>> >>  drivers/pci/controller/plda/Kconfig          |  12 +
>> >>  drivers/pci/controller/plda/Makefile         |   1 +
>> >>  drivers/pci/controller/plda/pcie-plda-host.c | 121 ++++-
>> >>  drivers/pci/controller/plda/pcie-plda.h      |  91 +++-
>> >>  drivers/pci/controller/plda/pcie-starfive.c  | 461 +++++++++++++++++++
>> >>  6 files changed, 688 insertions(+), 5 deletions(-)
>> >>  create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>> >>
>> >> diff --git a/MAINTAINERS b/MAINTAINERS
>> >> index ebdb65e195ee..4632cd411a3d 100644
>> >> --- a/MAINTAINERS
>> >> +++ b/MAINTAINERS
>> >> @@ -16679,6 +16679,13 @@ S:	Maintained
>> >>  F:	Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
>> >>  F:	drivers/pci/controller/dwc/pcie-uniphier*
>> >>
>> >> +PCIE DRIVER FOR STARFIVE JH71x0
>> >> +M:	Kevin Xie <kevin.xie@xxxxxxxxxxxxxxxx>
>> >> +L:	linux-pci@xxxxxxxxxxxxxxx
>> >> +S:	Maintained
>> >> +F:	Documentation/devicetree/bindings/pci/starfive*
>> >> +F:	drivers/pci/controller/plda/pcie-starfive.c
>> >> +
>> >>  PCIE DRIVER FOR ST SPEAR13XX
>> >>  M:	Pratyush Anand <pratyush.anand@xxxxxxxxx>
>> >>  L:	linux-pci@xxxxxxxxxxxxxxx
>> >> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
>> >> index e54a82ee94f5..8de661730aa5 100644
>> >> --- a/drivers/pci/controller/plda/Kconfig
>> >> +++ b/drivers/pci/controller/plda/Kconfig
>> >> @@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
>> >>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
>> >>  	  Host Bridge driver.
>> >>
>> >> +config PCIE_STARFIVE_HOST
>> >> +	tristate "StarFive PCIe host controller"
>> >> +	depends on OF && PCI_MSI
>> >> +	select PCIE_PLDA_HOST
>> >> +	help
>> >> +	  Say Y here if you want to support the StarFive PCIe controller
>> >> +	  in host mode. StarFive PCIe controller uses PLDA PCIe
>> >> +	  core.
>> >> +	  If you choose to build this driver as module it will
>> >> +	  be dynamically linked and module will be called
>> >> +	  pcie-starfive.ko
>> >> +
>> >>  endmenu
>> >> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
>> >> index 4340ab007f44..0ac6851bed48 100644
>> >> --- a/drivers/pci/controller/plda/Makefile
>> >> +++ b/drivers/pci/controller/plda/Makefile
>> >> @@ -1,3 +1,4 @@
>> >>  # SPDX-License-Identifier: GPL-2.0
>> >>  obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
>> >>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
>> >> +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
>> >> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
>> >> index 26e6cfd2eaba..8b32df477ad8 100644
>> >> --- a/drivers/pci/controller/plda/pcie-plda-host.c
>> >> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
>> >> @@ -20,6 +20,15 @@
>> >>
>> >>  #include "pcie-plda.h"
>> >>
>> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
>> >> +				int where)
>> >> +{
>> >> +	struct plda_pcie_rp *pcie = bus->sysdata;
>> >> +
>> >> +	return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
>> >> +}
>> >> +EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
>> >> +
>> >>  static void plda_handle_msi(struct irq_desc *desc)
>> >>  {
>> >>  	struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
>> >> @@ -370,6 +379,12 @@ static const struct plda_event_ops plda_event_ops = {
>> >>  	.get_events = plda_get_events,
>> >>  };
>> >>
>> >> +static const struct plda_event plda_default_event = {
>> >> +	.event_ops		= &plda_event_ops,
>> >> +	.intx_event		= EVENT_PM_MSI_INT_INTX,
>> >> +	.msi_event		= EVENT_PM_MSI_INT_MSI
>> >> +};
>> >> +
>> >>  static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
>> >>  				      const struct irq_domain_ops *ops)
>> >>  {
>> >> @@ -416,7 +431,6 @@ int plda_init_interrupts(struct platform_device *pdev,
>> >>  			 const struct plda_event *event)
>> >>  {
>> >>  	struct device *dev = &pdev->dev;
>> >> -	int irq;
>> >>  	int i, intx_irq, msi_irq, event_irq;
>> >>  	int ret;
>> >>  	const struct irq_domain_ops *irq_dom_ops;
>> >> @@ -434,8 +448,8 @@ int plda_init_interrupts(struct platform_device *pdev,
>> >>  		return ret;
>> >>  	}
>> >>
>> >> -	irq = platform_get_irq(pdev, 0);
>> >> -	if (irq < 0)
>> >> +	port->irq = platform_get_irq(pdev, 0);
>> >> +	if (port->irq < 0)
>> >>  		return -ENODEV;
>> >
>> > Here you're dropping the local variable irq and just use port->irq directly..
>> >
>> >>
>> >>  	port->event_ops = event->event_ops;
>> >> @@ -465,6 +479,7 @@ int plda_init_interrupts(struct platform_device *pdev,
>> >>  		dev_err(dev, "failed to map INTx interrupt\n");
>> >>  		return -ENXIO;
>> >>  	}
>> >> +	port->intx_irq = intx_irq;
>> >
>> > ..but for intx_irq..
>> >
>> >>
>> >>  	/* Plug the INTx chained handler */
>> >>  	irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
>> >> @@ -473,12 +488,13 @@ int plda_init_interrupts(struct platform_device *pdev,
>> >>  				     event->msi_event);
>> >>  	if (!msi_irq)
>> >>  		return -ENXIO;
>> >> +	port->msi_irq = msi_irq;
>> >
>> > ..and msi_irq you're keeping the local variable. I think you should drop
>> > the local variables here too, or at least do the same for all of them.
>> >
>> OK, remove all the local variables is better.
>> >>
>> >>  	/* Plug the MSI chained handler */
>> >>  	irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
>> >>
>> >>  	/* Plug the main event chained handler */
>> >> -	irq_set_chained_handler_and_data(irq, plda_handle_event, port);
>> >> +	irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
>> >>
>> >>  	return 0;
>> >>  }
>> >> @@ -544,3 +560,100 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> >>  	return 0;
>> >>  }
>> >>  EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
>> >> +
>> >> +static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
>> >> +{
>> >> +	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
>> >> +	irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
>> >> +	irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
>> >> +
>> >> +	irq_domain_remove(pcie->msi.msi_domain);
>> >> +	irq_domain_remove(pcie->msi.dev_domain);
>> >> +
>> >> +	irq_domain_remove(pcie->intx_domain);
>> >> +	irq_domain_remove(pcie->event_domain);
>> >> +}
>> >> +
>> >> +int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
>> >> +{
>> >> +	struct resource *cfg_res;
>> >> +	struct device *dev = port->dev;
>> >> +	int ret;
>> >> +	struct pci_host_bridge *bridge;
>> >> +	struct platform_device *pdev = to_platform_device(dev);
>> >
>> > This looks weird. Please order initialized variables first and maybe even do
>> > reverse christmas tree order. Eg. longeist lines first.
>> >
>> OK, The same with other places.
>> >> +
>> >> +	port->bridge_addr =
>> >> +		devm_platform_ioremap_resource_byname(pdev, "apb");
>> >> +
>> >> +	if (IS_ERR(port->bridge_addr))
>> >> +		return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
>> >> +				     "failed to map reg memory\n");
>> >> +
>> >> +	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
>> >> +	if (!cfg_res)
>> >> +		return dev_err_probe(dev, -ENODEV,
>> >> +				     "failed to get config memory\n");
>> >> +
>> >> +	port->config_base = devm_ioremap_resource(dev, cfg_res);
>> >> +	if (IS_ERR(port->config_base))
>> >> +		return dev_err_probe(dev, PTR_ERR(port->config_base),
>> >> +				     "failed to map config memory\n");
>> >> +
>> >> +	port->phy = devm_phy_optional_get(dev, NULL);
>> >> +	if (IS_ERR(port->phy))
>> >> +		return dev_err_probe(dev, PTR_ERR(port->phy),
>> >> +				     "failed to get pcie phy\n");
>> >> +
>> >> +	bridge = devm_pci_alloc_host_bridge(dev, 0);
>> >> +	if (!bridge)
>> >> +		return dev_err_probe(dev, -ENOMEM,
>> >> +				     "failed to alloc bridge\n");
>> >> +
>> >> +	if (port->host_ops && port->host_ops->host_init) {
>> >> +		ret = port->host_ops->host_init(port);
>> >> +		if (ret)
>> >> +			return ret;
>> >> +	}
>> >> +
>> >> +	port->bridge = bridge;
>> >> +	plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
>> >> +			       resource_size(cfg_res));
>> >> +	plda_pcie_setup_iomems(bridge, port);
>> >> +	plda_set_default_msi(&port->msi);
>> >> +	ret = plda_init_interrupts(pdev, port, &plda_default_event);
>> >> +	if (ret)
>> >> +		goto err_host;
>> >> +
>> >> +	/* Set default bus ops */
>> >> +	bridge->ops = ops;
>> >> +	bridge->sysdata = port;
>> >> +
>> >> +	ret = pci_host_probe(bridge);
>> >> +	if (ret < 0) {
>> >> +		dev_err(dev, "failed to pci host probe: %d\n", ret);
>> >
>> > I think you mean:
>> >
>> > dev_err_probe(dev, ret, "failed to probe pci host\n");
>> >
>> I check with dev_err_probe, It is better than dev_err, I will replace this.
>> >> +		goto err_probe;
>> >> +	}
>> >> +
>> >> +	return ret;
>> >> +
>> >> +err_probe:
>> >> +	plda_pcie_irq_domain_deinit(port);
>> >> +err_host:
>> >> +	if (port->host_ops && port->host_ops->host_deinit)
>> >> +		port->host_ops->host_deinit(port);
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_init);
>> >> +
>> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *port)
>> >> +{
>> >> +	pci_stop_root_bus(port->bridge->bus);
>> >> +	pci_remove_root_bus(port->bridge->bus);
>> >> +
>> >> +	plda_pcie_irq_domain_deinit(port);
>> >> +
>> >> +	if (port->host_ops && port->host_ops->host_deinit)
>> >> +		port->host_ops->host_deinit(port);
>> >> +}
>> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
>> >> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
>> >> index b7420598a326..e571047d7944 100644
>> >> --- a/drivers/pci/controller/plda/pcie-plda.h
>> >> +++ b/drivers/pci/controller/plda/pcie-plda.h
>> >> @@ -6,14 +6,24 @@
>> >>  #ifndef _PCIE_PLDA_H
>> >>  #define _PCIE_PLDA_H
>> >>
>> >> +#include <linux/phy/phy.h>
>> >> +
>> >>  /* Number of MSI IRQs */
>> >>  #define PLDA_MAX_NUM_MSI_IRQS			32
>> >>
>> >>  /* PCIe Bridge Phy Regs */
>> >> +#define GEN_SETTINGS				0x80
>> >> +#define  RP_ENABLE				1
>> >> +#define PCIE_PCI_IDS_DW1			0x9c
>> >> +#define  IDS_CLASS_CODE_SHIFT			16
>> >>  #define PCIE_PCI_IRQ_DW0			0xa8
>> >>  #define  MSIX_CAP_MASK				BIT(31)
>> >>  #define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
>> >>  #define  NUM_MSI_MSGS_SHIFT			4
>> >> +#define PCI_MISC				0xb4
>> >> +#define  PHY_FUNCTION_DIS			BIT(15)
>> >> +#define PCIE_WINROM				0xfc
>> >> +#define  PREF_MEM_WIN_64_SUPPORT		BIT(3)
>> >>
>> >>  #define IMASK_LOCAL				0x180
>> >>  #define  DMA_END_ENGINE_0_MASK			0x00000000u
>> >> @@ -64,6 +74,8 @@
>> >>  #define ISTATUS_HOST				0x18c
>> >>  #define IMSI_ADDR				0x190
>> >>  #define ISTATUS_MSI				0x194
>> >> +#define PMSG_SUPPORT_RX				0x3f0
>> >> +#define  PMSG_LTR_SUPPORT			BIT(2)
>> >>
>> >>  /* PCIe Master table init defines */
>> >>  #define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
>> >> @@ -85,6 +97,8 @@
>> >>  #define  PCIE_TX_RX_INTERFACE			0x00000000u
>> >>  #define  PCIE_CONFIG_INTERFACE			0x00000001u
>> >>
>> >> +#define CONFIG_SPACE_ADDR			0x1000u
>> >> +
>> >>  #define ATR_ENTRY_SIZE				32
>> >>
>> >>  #define EVENT_A_ATR_EVT_POST_ERR		0
>> >> @@ -134,6 +148,11 @@ struct plda_event_ops {
>> >>  	u32 (*get_events)(struct plda_pcie_rp *pcie);
>> >>  };
>> >>
>> >> +struct plda_pcie_host_ops {
>> >> +	int (*host_init)(struct plda_pcie_rp *pcie);
>> >> +	void (*host_deinit)(struct plda_pcie_rp *pcie);
>> >> +};
>> >> +
>> >>  struct plda_msi {
>> >>  	struct mutex lock;		/* Protect used bitmap */
>> >>  	struct irq_domain *msi_domain;
>> >> @@ -145,12 +164,19 @@ struct plda_msi {
>> >>
>> >>  struct plda_pcie_rp {
>> >>  	struct device *dev;
>> >> +	struct pci_host_bridge *bridge;
>> >>  	struct irq_domain *intx_domain;
>> >>  	struct irq_domain *event_domain;
>> >>  	raw_spinlock_t lock;
>> >>  	struct plda_msi msi;
>> >>  	const struct plda_event_ops *event_ops;
>> >> +	const struct plda_pcie_host_ops *host_ops;
>> >> +	struct phy *phy;
>> >>  	void __iomem *bridge_addr;
>> >> +	void __iomem *config_base;
>> >> +	int irq;
>> >> +	int msi_irq;
>> >> +	int intx_irq;
>> >>  	int num_events;
>> >>  };
>> >>
>> >> @@ -163,6 +189,7 @@ struct plda_event {
>> >>  	int msi_event;
>> >>  };
>> >>
>> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, int where);
>> >>  int plda_init_interrupts(struct platform_device *pdev,
>> >>  			 struct plda_pcie_rp *port,
>> >>  			 const struct plda_event *event);
>> >> @@ -171,4 +198,66 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>> >>  			    size_t size);
>> >>  int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> >>  			   struct plda_pcie_rp *port);
>> >> -#endif
>> >> +int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
>> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
>> >> +
>> >> +static inline void plda_set_default_msi(struct plda_msi *msi)
>> >> +{
>> >> +	msi->vector_phy = IMSI_ADDR;
>> >> +	msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
>> >> +	value |= RP_ENABLE;
>> >> +	writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
>> >> +	value &= 0xff;
>> >> +	value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
>> >
>> > This looks suspicious. You're clearing the lower 8 bits, but setting
>> > bits 16 and up. Also the parentheses are not strictly necessary.
>> >
>> I will add comments to this.
>> >> +	writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
>> >> +	value |= PREF_MEM_WIN_64_SUPPORT;
>> >> +	writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
>> >> +	value &= ~PMSG_LTR_SUPPORT;
>> >> +	writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + PCI_MISC);
>> >> +	value |= PHY_FUNCTION_DIS;
>> >> +	writel_relaxed(value, plda->bridge_addr + PCI_MISC);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
>> >> +{
>> >> +	void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR;
>> >> +
>> >> +	writel_relaxed(val & 0xffffffff, addr + PCI_BASE_ADDRESS_0);
>> >> +	writel_relaxed(val >> 32, addr + PCI_BASE_ADDRESS_1);
>> >
>> > Consider using lower_32_bits(val) and upper_32_bits(val) here.
>> >
>> >> +}
>> >> +#endif /* _PCIE_PLDA_H */
>> >> diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
>> >> new file mode 100644
>> >> index 000000000000..42099fef0d7d
>> >> --- /dev/null
>> >> +++ b/drivers/pci/controller/plda/pcie-starfive.c
>> >> @@ -0,0 +1,461 @@
>> >> +// SPDX-License-Identifier: GPL-2.0+
>> >> +/*
>> >> + * PCIe host controller driver for StarFive JH7110 Soc.
>> >> + *
>> >> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
>> >> + */
>> >> +
>> >> +#include <linux/bitfield.h>
>> >> +#include <linux/clk.h>
>> >> +#include <linux/delay.h>
>> >> +#include <linux/gpio/consumer.h>
>> >> +#include <linux/interrupt.h>
>> >> +#include <linux/kernel.h>
>> >> +#include <linux/mfd/syscon.h>
>> >> +#include <linux/module.h>
>> >> +#include <linux/of_address.h>
>> >> +#include <linux/of_irq.h>
>> >> +#include <linux/of_pci.h>
>> >> +#include <linux/pci.h>
>> >> +#include <linux/platform_device.h>
>> >> +#include <linux/pm_runtime.h>
>> >> +#include <linux/regmap.h>
>> >> +#include <linux/reset.h>
>> >> +#include "../../pci.h"
>> >> +
>> >> +#include "pcie-plda.h"
>> >> +
>> >> +#define PCIE_FUNC_NUM			4
>> >> +
>> >> +/* system control */
>> >> +#define STG_SYSCON_PCIE0_BASE			0x48
>> >> +#define STG_SYSCON_PCIE1_BASE			0x1f8
>> >> +
>> >> +#define STG_SYSCON_ARFUNC_OFFSET		0x78
>> >> +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK	 GENMASK(22, 8)
>> >> +#define STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(x)	 FIELD_PREP(GENMASK(20, 17), x)
>> >> +#define STG_SYSCON_AWFUNC_OFFSET		0x7c
>> >> +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK	 GENMASK(14, 0)
>> >> +#define STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(x)	 FIELD_PREP(GENMASK(12, 9), x)
>> >> +#define STG_SYSCON_CLKREQ			 BIT(22)
>> >> +#define STG_SYSCON_CKREF_SRC_MASK		 GENMASK(19, 18)
>> >> +#define STG_SYSCON_RP_NEP_OFFSET		0xe8
>> >> +#define STG_SYSCON_K_RP_NEP			 BIT(8)
>> >> +#define STG_SYSCON_LNKSTA_OFFSET		0x170
>> >> +#define DATA_LINK_ACTIVE			 BIT(5)
>> >> +
>> >> +/* Parameters for the waiting for link up routine */
>> >> +#define LINK_WAIT_MAX_RETRIES	10
>> >> +#define LINK_WAIT_USLEEP_MIN	90000
>> >> +#define LINK_WAIT_USLEEP_MAX	100000
>> >> +
>> >> +struct starfive_jh7110_pcie {
>> >> +	struct plda_pcie_rp plda;
>> >> +	struct reset_control *resets;
>> >> +	struct clk_bulk_data *clks;
>> >> +	struct regmap *reg_syscon;
>> >> +	struct gpio_desc *power_gpio;
>> >> +	struct gpio_desc *reset_gpio;
>> >> +
>> >> +	u32 stg_arfun;
>> >> +	u32 stg_awfun;
>> >> +	u32 stg_rp_nep;
>> >> +	u32 stg_lnksta;
>> >> +
>> >> +	int num_clks;
>> >> +};
>> >> +
>> >> +/*
>> >> + * The BAR0/1 of bridge should be hidden during enumeration to
>> >> + * avoid the sizing and resource allocation by PCIe core.
>> >> + */
>> >> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
>> >> +				      int offset)
>> >> +{
>> >> +	if (pci_is_root_bus(bus) && !devfn &&
>> >> +	    (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
>> >> +		return true;
>> >> +
>> >> +	return false;
>> >> +}
>> >> +
>> >> +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
>> >> +				      int where, int size, u32 value)
>> >> +{
>> >> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
>> >> +		return PCIBIOS_BAD_REGISTER_NUMBER;
>> >> +
>> >> +	return pci_generic_config_write(bus, devfn, where, size, value);
>> >> +}
>> >> +
>> >> +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
>> >> +				     int where, int size, u32 *value)
>> >> +{
>> >> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
>> >> +		return PCIBIOS_BAD_REGISTER_NUMBER;
>> >> +
>> >> +	return pci_generic_config_read(bus, devfn, where, size, value);
>> >> +}
>> >> +
>> >> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, struct device *dev)
>> >> +{
>> >> +	int domain_nr, stg_pcie_base;
>> >> +
>> >> +	pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
>> >> +	if (pcie->num_clks < 0)
>> >> +		return dev_err_probe(dev, -ENODEV,
>> >> +			"failed to get pcie clocks\n");
>> >> +
>> >> +	pcie->resets = devm_reset_control_array_get_exclusive(dev);
>> >> +	if (IS_ERR(pcie->resets))
>> >> +		return dev_err_probe(dev, PTR_ERR(pcie->resets),
>> >> +			"failed to get pcie resets");
>> >> +
>> >> +	pcie->reg_syscon =
>> >> +		syscon_regmap_lookup_by_phandle(dev->of_node,
>> >> +						"starfive,stg-syscon");
>> >> +
>> >> +	if (IS_ERR(pcie->reg_syscon))
>> >> +		return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
>> >> +			"failed to parse starfive,stg-syscon\n");
>> >> +
>> >> +	domain_nr = of_get_pci_domain_nr(dev->of_node);
>> >> +
>> >> +	if (domain_nr < 0 || domain_nr > 1)
>> >> +		return dev_err_probe(dev, -ENODEV,
>> >> +			"failed to get valid pcie id\n");
>> >> +
>> >> +	if (domain_nr == 0)
>> >> +		stg_pcie_base = STG_SYSCON_PCIE0_BASE;
>> >> +	else
>> >> +		stg_pcie_base = STG_SYSCON_PCIE1_BASE;
>> >
>> > It seems you only need the domain_nr for the determining this offset into the
>> > stg_syscon. Since this is already specific to the JH7110 SoC, wouldn't it be
>> > safer to match on the 0x2b000000/0x2c000000 or 0x940000000/0x9c0000000
>> > address of the peripheral instead?
>> >
>> Maybe this codes not just bind to JH7110 SoC.
> 
> Right, but in that case the STG_SYSCON_PCIE{0,1}_BASE offsets will also be
> different, so you'd need to get them from device tree match data anyway, and
> then you might as well have an { address, offset } table.
> Previous I discuss this with Conor,The match data is not added now.
The match data will be added While adding different device tree compatible. 
Now just one compatible.
>> >> +
>> >> +	pcie->stg_arfun = stg_pcie_base + STG_SYSCON_ARFUNC_OFFSET;
>> >> +	pcie->stg_awfun = stg_pcie_base + STG_SYSCON_AWFUNC_OFFSET;
>> >> +	pcie->stg_rp_nep = stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET;
>> >> +	pcie->stg_lnksta = stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET;
>> >
>> > These offsets are all the same for both pcie0 and pcie1 so why do you need a
>> > variable for each? Eg. why not just
>> >
>> > if (domain_nr == 0)
>> > 	pcie->stg_base = STG_SYSCON_PCIE0_BASE;
>> > else
>> > 	pcie->stg_base = STG_SYSCON_PCIE1_BASE;
>> >
>> > ..and then add add those static offsets where needed?
>> >
>> OK. I will try to modify this.
>> >> +
>> >> +	pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
>> >> +	if (IS_ERR(pcie->reset_gpio)) {
>> >> +		dev_warn(dev, "failed to get perst-gpio\n");
>> >
>> > Why is this a warn when you actually error out? I think you mean
>> >
>> > return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio, "failed to get
>> > reset GPIO\n");
>> >
>> >> +		return -EINVAL;
>> >> +	}
>> >> +
>> >> +	pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
>> >> +	if (IS_ERR(pcie->power_gpio)) {
>> >> +		dev_warn(dev, "failed to get power-gpio\n");
>> >> +		return -EINVAL;
>> >
>> > return dev_err_probe(dev, PTR_ERR(pcie->power_gpio), "failed to get
>> > power GPIO\n");
>> >
>> >> +	}
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +static struct pci_ops starfive_pcie_ops = {
>> >> +	.map_bus	= plda_pcie_map_bus,
>> >> +	.read           = starfive_pcie_config_read,
>> >> +	.write          = starfive_pcie_config_write,
>> >> +};
>> >> +
>> >> +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
>> >> +{
>> >> +	int ret;
>> >> +	struct device *dev = pcie->plda.dev;
>> >
>> > Again, please order initialized variables first.
>> >
>> >> +
>> >> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to enable clocks\n");
>> >> +		return ret;
>> >
>> > return dev_err_probe(dev, ret, "failed to enable clocks\n");
>> >
>> >> +	}
>> >> +
>> >> +	ret = reset_control_deassert(pcie->resets);
>> >> +	if (ret) {
>> >> +		clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
>> >> +		dev_err(dev, "failed to resets\n");
>> >
>> > I think you mean
>> > return dev_err_probe(dev, ret, "failed to deassert resets\n");
>> >
>> >> +	}
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
>> >> +{
>> >> +	reset_control_assert(pcie->resets);
>> >> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
>> >> +}
>> >> +
>> >> +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie =
>> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
>> >> +	struct device *dev = pcie->plda.dev;
>> >
>> > This is only used once below, so just use pcie->plda.dev directly there.
>> >
>> OK, thanks
>> >> +	int ret;
>> >> +	u32 stg_reg_val;
>> >> +
>> >> +	ret = regmap_read(pcie->reg_syscon, pcie->stg_lnksta, &stg_reg_val);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to read link status\n");
>> >> +		return false;
>> >> +	}
>> >> +
>> >> +	if (stg_reg_val & DATA_LINK_ACTIVE)
>> >> +		return true;
>> >> +
>> >> +	return false;
>> >
>> > These last 4 lines is just "return stg_reg_val & DATA_LINK_ACTIVE;" right?
>> >
>> OK
>> >> +}
>> >> +
>> >> +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
>> >> +{
>> >> +	struct device *dev = pcie->plda.dev;
>> >
>> > Only used once, just inline.
>> >
>> >> +	int retries;
>> >> +
>> >> +	/* Check if the link is up or not */
>> >> +	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
>> >> +		if (starfive_pcie_link_up(&pcie->plda)) {
>> >> +			dev_info(dev, "port link up\n");
>> >> +			return 0;
>> >> +		}
>> >> +		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
>> >> +	}
>> >> +
>> >> +	return -ETIMEDOUT;
>> >> +}
>> >> +
>> >> +static int starfive_pcie_enable_phy(struct device *dev, struct plda_pcie_rp *pcie)
>> >> +{
>> >> +	int ret;
>> >> +
>> >> +	if (!pcie->phy)
>> >> +		return 0;
>> >> +
>> >> +	ret = phy_init(pcie->phy);
>> >> +	if (ret)
>> >> +		return dev_err_probe(dev, ret,
>> >> +			"failed to initialize pcie phy\n");
>> >> +
>> >> +	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to set pcie mode\n");
>> >> +		goto err_phy_on;
>> >> +	}
>> >> +
>> >> +	ret = phy_power_on(pcie->phy);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to power on pcie phy\n");
>> >> +		goto err_phy_on;
>> >> +	}
>> >> +
>> >> +	return 0;
>> >> +
>> >> +err_phy_on:
>> >> +	phy_exit(pcie->phy);
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +static void starfive_pcie_disable_phy(struct plda_pcie_rp *pcie)
>> >> +{
>> >> +	phy_power_off(pcie->phy);
>> >> +	phy_exit(pcie->phy);
>> >> +}
>> >> +
>> >> +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie =
>> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
>> >> +
>> >> +	starfive_pcie_clk_rst_deinit(pcie);
>> >> +	if (pcie->power_gpio)
>> >> +		gpiod_set_value_cansleep(pcie->power_gpio, 0);
>> >> +	starfive_pcie_disable_phy(plda);
>> >> +}
>> >> +
>> >> +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	int i;
>> >> +	struct starfive_jh7110_pcie *pcie =
>> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
>> >> +	struct device *dev = plda->dev;
>> >> +	int ret;
>> >
>> > Weird ordering again.
>> >
>> >> +
>> >> +	ret = starfive_pcie_enable_phy(dev, plda);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_rp_nep,
>> >> +			   STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
>> >> +
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
>> >> +			   STG_SYSCON_CKREF_SRC_MASK,
>> >> +			   FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
>> >> +
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
>> >> +			   STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
>> >> +
>> >> +	ret = starfive_pcie_clk_rst_init(pcie);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	if (pcie->power_gpio)
>> >> +		gpiod_set_value_cansleep(pcie->power_gpio, 1);
>> >> +
>> >> +	if (pcie->reset_gpio)
>> >> +		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
>> >> +
>> >> +	/* Disable physical functions except #0 */
>> >> +	for (i = 1; i < PCIE_FUNC_NUM; i++) {
>> >> +		regmap_update_bits(pcie->reg_syscon,
>> >> +				   pcie->stg_arfun,
>> >> +				   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
>> >> +				   STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(i));
>> >> +
>> >> +		regmap_update_bits(pcie->reg_syscon,
>> >> +				   pcie->stg_awfun,
>> >> +				   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
>> >> +				   STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(i));
>> >> +
>> >> +		plda_pcie_disable_func(plda);
>> >> +	}
>> >> +
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_arfun,
>> >> +			   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, 0);
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
>> >> +			   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, 0);
>> >> +
>> >> +	plda_pcie_enable_root_port(plda);
>> >> +	plda_pcie_write_rc_bar(plda, 0);
>> >> +
>> >> +	/* PCIe PCI Standard Configuration Identification Settings. */
>> >> +	plda_pcie_set_standard_class(plda);
>> >> +
>> >> +	/*
>> >> +	 * The LTR message forwarding of PCIe Message Reception was set by core
>> >> +	 * as default, but the forward id & addr are also need to be reset.
>> >> +	 * If we do not disable LTR message forwarding here, or set a legal
>> >> +	 * forwarding address, the kernel will get stuck after this driver probe.
>> >> +	 * To workaround, disable the LTR message forwarding support on
>> >> +	 * PCIe Message Reception.
>> >> +	 */
>> >> +	plda_pcie_disable_ltr(plda);
>> >> +
>> >> +	/* Prefetchable memory window 64-bit addressing support */
>> >> +	plda_pcie_set_pref_win_64bit(plda);
>> >> +
>> >> +	/* Ensure that PERST has been asserted for at least 100 ms,
>> >> +	 * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
>> >> +	 */
>> >> +	msleep(100);
>> >> +	if (pcie->reset_gpio)
>> >> +		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
>> >> +
>> >> +	/* As the requirement in PCIe base spec r6.0, system (<=5GT/s) must
>> >> +	 * wait a minimum of 100 ms following exit from a conventional reset
>> >> +	 * before sending a configuration request to the device.
>> >> +	 */
>> >> +	msleep(100);
>> >> +
>> >> +	if (starfive_pcie_host_wait_for_link(pcie))
>> >> +		dev_info(dev, "port link down\n");
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +static const struct plda_pcie_host_ops sf_host_ops = {
>> >> +	.host_init = starfive_pcie_host_init,
>> >> +	.host_deinit = starfive_pcie_host_deinit,
>> >> +};
>> >> +
>> >> +static int starfive_pcie_probe(struct platform_device *pdev)
>> >> +{
>> >> +	struct device *dev = &pdev->dev;
>> >> +	struct starfive_jh7110_pcie *pcie;
>> >> +	struct plda_pcie_rp *plda;
>> >> +	int ret;
>> >> +
>> >> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>> >> +	if (!pcie)
>> >> +		return -ENOMEM;
>> >> +
>> >> +	plda = &pcie->plda;
>> >> +	plda->dev = dev;
>> >> +
>> >> +	ret = starfive_pcie_parse_dt(pcie, dev);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	plda->host_ops = &sf_host_ops;
>> >> +	plda->num_events = NUM_PLDA_EVENTS;
>> >> +	ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	pm_runtime_enable(&pdev->dev);
>> >> +	pm_runtime_get_sync(&pdev->dev);
>> >> +	platform_set_drvdata(pdev, pcie);
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +static void starfive_pcie_remove(struct platform_device *pdev)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
>> >> +
>> >> +	plda_pcie_host_deinit(&pcie->plda);
>> >> +	platform_set_drvdata(pdev, NULL);
>> >> +}
>> >> +
>> >> +static int starfive_pcie_suspend_noirq(struct device *dev)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
>> >> +
>> >> +	if (!pcie)
>> >> +		return 0;
>> >> +
>> >> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
>> >> +	starfive_pcie_disable_phy(&pcie->plda);
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +static int starfive_pcie_resume_noirq(struct device *dev)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
>> >> +	int ret;
>> >> +
>> >> +	ret = starfive_pcie_enable_phy(dev, &pcie->plda);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to enable clocks\n");
>> >> +		starfive_pcie_disable_phy(&pcie->plda);
>> >> +		return ret;
>> >> +	}
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +static const struct dev_pm_ops starfive_pcie_pm_ops = {
>> >> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
>> >> +				  starfive_pcie_resume_noirq)
>> >> +};
>> >> +
>> >> +static const struct of_device_id starfive_pcie_of_match[] = {
>> >> +	{ .compatible = "starfive,jh7110-pcie"},
>> >
>> > Missing space before }
>> >
>> >> +	{ /* sentinel */ }
>> >> +};
>> >> +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
>> >> +
>> >> +static struct platform_driver starfive_pcie_driver = {
>> >> +	.driver = {
>> >> +		.name = "pcie-starfive",
>> >> +		.of_match_table = of_match_ptr(starfive_pcie_of_match),
>> >> +#ifdef CONFIG_PM_SLEEP
>> >> +		.pm = &starfive_pcie_pm_ops,
>> >> +#endif
>> >
>> > This can be just .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
>> >
>> OK
>> >> +	},
>> >> +	.probe = starfive_pcie_probe,
>> >> +	.remove_new = starfive_pcie_remove,
>> >> +};
>> >> +module_platform_driver(starfive_pcie_driver);
>> >> +
>> >> +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
>> >> +MODULE_LICENSE("GPL v2");
>> >> --
>> >> 2.17.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux