Hi Felipe, On Fri, Dec 26, 2014 at 01:28:22PM -0600, Felipe Balbi wrote: > With this driver, we can report KEY_POWER on > AM437x SK. This patch has been tested with said > board. > > Signed-off-by: Felipe Balbi <balbi@xxxxxx> > --- > drivers/input/misc/Kconfig | 10 +++ > drivers/input/misc/Makefile | 1 + > drivers/input/misc/tps65218-pwrbutton.c | 135 ++++++++++++++++++++++++++++++++ > 3 files changed, 146 insertions(+) > create mode 100644 drivers/input/misc/tps65218-pwrbutton.c > > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig > index 23297ab..364cfb8 100644 > --- a/drivers/input/misc/Kconfig > +++ b/drivers/input/misc/Kconfig > @@ -404,6 +404,16 @@ config INPUT_RETU_PWRBUTTON > To compile this driver as a module, choose M here. The module will > be called retu-pwrbutton. > > +config INPUT_TPS65218_PWRBUTTON > + tristate "TPS65218 Power button driver" > + depends on MFD_TPS65218 > + help > + Say Y here if you want to enable power buttong reporting for > + the TPS65218 Power Management IC device. > + > + To compile this driver as a module, choose M here. The module will > + be called tps65218-pwrbutton. > + > config INPUT_TWL4030_PWRBUTTON > tristate "TWL4030 Power button Driver" > depends on TWL4030_CORE > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile > index 19c7603..a923753 100644 > --- a/drivers/input/misc/Makefile > +++ b/drivers/input/misc/Makefile > @@ -59,6 +59,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o > obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o > obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o > obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o > +obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o > obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o > obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o > obj-$(CONFIG_INPUT_TWL6040_VIBRA) += twl6040-vibra.o > diff --git a/drivers/input/misc/tps65218-pwrbutton.c b/drivers/input/misc/tps65218-pwrbutton.c > new file mode 100644 > index 0000000..a1f8a19 > --- /dev/null > +++ b/drivers/input/misc/tps65218-pwrbutton.c > @@ -0,0 +1,135 @@ > +/* > + * Texas Instruments' TPS65218 Power Button Input Driver > + * > + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ > + * Author: Felipe Balbi <balbi@xxxxxx> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/init.h> > +#include <linux/input.h> > +#include <linux/interrupt.h> > +#include <linux/kernel.h> > +#include <linux/mfd/tps65218.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > + > +struct tps65218_pwrbutton { > + struct device *dev; > + struct tps65218 *tps; > + struct input_dev *idev; > + int irq; You do not need to store IRQ since you are not using it outside of probe(). > + > + unsigned int pressed:1; You probably can remove 'pressed' as well and send events directly to input core and rely on it to filter out duplicates so there won't be release event without press event. If you prefer to keep it please use bool instead of bit field. > +}; > + > +static irqreturn_t tps65218_pwr_irq(int irq, void *_pwr) > +{ > + struct tps65218_pwrbutton *pwr = _pwr; > + unsigned int reg; > + int ret; > + > + ret = tps65218_reg_read(pwr->tps, TPS65218_REG_STATUS, ®); > + if (ret) { > + dev_err(pwr->dev, "can't read register --> %d\n", ret); > + goto out; > + } > + > + if (reg & TPS65218_STATUS_PB_STATE) { > + input_report_key(pwr->idev, KEY_POWER, 1); > + pm_wakeup_event(pwr->dev, 0); > + pwr->pressed = true; > + } else { > + /* > + * we don't want to report KEY_POWER releases on any of the > + * other IRQ sources. Only when button was previously pressed > + */ > + if (pwr->pressed) { > + input_report_key(pwr->idev, KEY_POWER, 0); > + pwr->pressed = false; > + } > + } > + > + input_sync(pwr->idev); > + > +out: > + return IRQ_HANDLED; > +} > + > +static int tps65218_pwron_probe(struct platform_device *pdev) > +{ > + struct tps65218 *tps = dev_get_drvdata(pdev->dev.parent); > + struct device *dev = &pdev->dev; > + struct tps65218_pwrbutton *pwr; > + struct input_dev *idev; > + int ret; > + > + pwr = devm_kzalloc(dev, sizeof(*pwr), GFP_KERNEL); > + if (!pwr) > + return -ENOMEM; > + > + idev = devm_input_allocate_device(dev); > + if (!idev) > + return -ENOMEM; > + > + idev->name = "tps65218_pwrbutton"; > + idev->phys = "tps65218_pwrbutton/input0"; > + idev->dev.parent = dev; > + idev->id.bustype = BUS_I2C; > + > + input_set_capability(idev, EV_KEY, KEY_POWER); > + > + pwr->tps = tps; > + pwr->dev = dev; > + pwr->idev = idev; > + pwr->irq = platform_get_irq(pdev, 0); > + platform_set_drvdata(pdev, pwr); > + device_init_wakeup(dev, true); > + > + ret = devm_request_threaded_irq(dev, pwr->irq, NULL, tps65218_pwr_irq, > + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, > + dev_name(dev), pwr); I am very fond of calling variables that hold error codes "error", Then you have: error = f(); if (error) { /* handle error */ } > + if (ret) { > + dev_err(dev, "failed to request IRQ #%d --> %d\n", > + pwr->irq, ret); > + return ret; > + } > + > + ret = input_register_device(idev); > + if (ret) { > + dev_err(dev, "Can't register power button --> %d\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static struct of_device_id of_tps65218_pwr_match[] = { > + { .compatible = "ti,tps65218-pwrbutton" }, > + { }, > +}; > + > +MODULE_DEVICE_TABLE(of, of_tps65218_pwr_match); > + > +static struct platform_driver tps65218_pwron_driver = { > + .probe = tps65218_pwron_probe, > + .driver = { > + .name = "tps65218_pwrbutton", > + .of_match_table = of_tps65218_pwr_match, > + }, > +}; > +module_platform_driver(tps65218_pwron_driver); > + > +MODULE_DESCRIPTION("TPS65218 Power Button"); > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Felipe Balbi <balbi@xxxxxx>"); > -- > 2.2.0 > Thanks! -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
