Re: [PATCHv2] media: i2c/adp1653: devicetree support for adp1653

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Dec 26, 2014 at 2:33 PM, Pavel Machek <pavel@xxxxxx> wrote:
> Hi!
>
>> > We are moving to device tree support on OMAP3, but that currently
>> > breaks ADP1653 driver. This adds device tree support, plus required
>> > documentation.
>> >
>> > Signed-off-by: Pavel Machek <pavel@xxxxxx>
>> >
>> > ---
>> >
>> > Changed -microsec to -us, as requested by devicetree people.
>> >
>> > Fixed checkpatch issues.
>> >
>> > diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
>> > index 2d88816..2c6c7c5 100644
>> > --- a/Documentation/devicetree/bindings/leds/common.txt
>> > +++ b/Documentation/devicetree/bindings/leds/common.txt
>> > @@ -14,6 +14,15 @@ Optional properties for child nodes:
>> >       "ide-disk" - LED indicates disk activity
>> >       "timer" - LED flashes at a fixed, configurable rate
>> >
>> > +- max-microamp : maximum intensity in microamperes of the LED
>> > +                (torch LED for flash devices)
>> > +- flash-max-microamp : maximum intensity in microamperes of the
>> > +                       flash LED; it is mandatory if the LED should
>> > +                      support the flash mode
>> > +- flash-timeout-microsec : timeout in microseconds after which the flash
>> > +                           LED is turned off
>>
>> Doesn't all this go in your flash led binding patch?
>
> No, I should not have included this part.
>
>> > +Example:
>> > +
>> > +        adp1653: led-controller@30 {
>> > +                compatible = "adi,adp1653";
>> > +               reg = <0x30>;
>> > +                gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
>> > +
>> > +               flash {
>> > +                        flash-timeout-us = <500000>;
>> > +                        flash-max-microamp = <320000>;
>> > +                        max-microamp = <50000>;
>> > +               };
>> > +                indicator {
>>
>> These are different LEDs or different modes?
>
> flash & indicator are different LEDs. One is white, one is red. Flash
> can be used as a flash and as a torch.
>
>> > +                        max-microamp = <17500>;
>>
>> This is a bit inconsistent. The binding says this is for flash LEDs
>> torch mode, but I see no reason why it can't be common. Can you update
>> the binding doc to be clear here.
>
> By inconsisnent, you mean you want patch below?

Yes.

>> Also, aren't you missing label properties?
>
> label is optional, and as my driver does not yet use it, I forgot
> about it.

Based on your node names, there are obviously user defined functions
for them already. So they should have labels whether or not the driver
uses them.

Rob

> Signed-off-by: Pavel Machek <pavel@xxxxxx>
>
> index 2c6c7c5..92d4dac 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -15,7 +15,6 @@ Optional properties for child nodes:
>       "timer" - LED flashes at a fixed, configurable rate
>
>  - max-microamp : maximum intensity in microamperes of the LED
> -                (torch LED for flash devices)
>  - flash-max-microamp : maximum intensity in microamperes of the
>                         flash LED; it is mandatory if the LED should
>                        support the flash mode
>
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux