Re: [PATCH 12/14] media: medkatek: vcodec: set secure mode to decoder driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 19, 2023 at 1:53 AM Hans Verkuil <hverkuil-cisco@xxxxxxxxx> wrote:
>
> On 18/09/2023 22:57, Jeffrey Kardatzke wrote:
> > On Fri, Sep 15, 2023 at 1:56 AM Hans Verkuil <hverkuil-cisco@xxxxxxxxx> wrote:
> >>
> >> On 15/09/2023 10:25, Yunfei Dong (董云飞) wrote:
> >>> Hi Hans & Nicolas,
> >>>
> >>> Thanks for your advice.
> >>>
> >>> On Tue, 2023-09-12 at 11:30 +0200, Hans Verkuil wrote:
> >>>>
> >>>> External email : Please do not click links or open attachments until
> >>>> you have verified the sender or the content.
> >>>>  Hi,
> >>>>
> >>>> On 9/11/23 17:54, Nicolas Dufresne wrote:
> >>>>> Hi,
> >>>>>
> >>>>> Le lundi 11 septembre 2023 à 20:59 +0800, Yunfei Dong a écrit :
> >>>>>> Setting secure mode flag to kernel when trying to play secure
> >>>>
> >>>> video,
> >>>>>> then decoder driver will initialize tee related interface to
> >>>>
> >>>> support
> >>>>>> svp.
> >>>>>
> >>>>>
> >>>>> This is not what the patch is doing, please rework. This patch is
> >>>>
> >>>> an vendor API
> >>>>> addition introducing V4L2_CID_MPEG_MTK_SET_SECURE_MODE. I should
> >>>>
> >>>> not have to
> >>>>> read your patch to understand this.
> >>>>>
> >>>>>>
> >>>>>> Signed-off-by: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
> >>>>>> ---
> >>>>>>  .../vcodec/decoder/mtk_vcodec_dec_stateless.c     | 15
> >>>>
> >>>> ++++++++++++++-
> >>>>>>  drivers/media/v4l2-core/v4l2-ctrls-defs.c         |  5 +++++
> >>>>>>  include/uapi/linux/v4l2-controls.h                |  1 +
> >>>>>>  3 files changed, 20 insertions(+), 1 deletion(-)
> >>>>>>
> >>>>>> diff --git
> >>>>
> >>>> a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_state
> >>>> less.c
> >>>> b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_state
> >>>> less.c
> >>>>>> index d2b09ce9f1cf..a981178c25d9 100644
> >>>>>> ---
> >>>>
> >>>> a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_state
> >>>> less.c
> >>>>>> +++
> >>>>
> >>>> b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_state
> >>>> less.c
> >>>>>> @@ -535,6 +535,17 @@ static int mtk_vdec_s_ctrl(struct v4l2_ctrl
> >>>>
> >>>> *ctrl)
> >>>>>>  ctrl->val = mtk_dma_contig_get_secure_handle(ctx, ctrl->val);
> >>>>>>  mtk_v4l2_vdec_dbg(3, ctx, "get secure handle: %d => 0x%x",
> >>>>
> >>>> sec_fd, ctrl->val);
> >>>>>>  break;
> >>>>>> +case V4L2_CID_MPEG_MTK_SET_SECURE_MODE:
> >>>>>
> >>>>> Stepping back a little and focusing on the API, what makes your
> >>>>
> >>>> driver so
> >>>>> special that it should be the only one having a "secure mode" ? We
> >>>>
> >>>> are touching
> >>>>> in gap in the media pipeline in Linux, and this should come with
> >>>>
> >>>> consideration
> >>>>> of the global API.
> >>>>>
> >>>>> Why is this API better then let's say Google Android one, were they
> >>>>
> >>>> expose 2
> >>>>> device nodes in their fork of the MFC driver (a secure and a non
> >>>>
> >>>> secure one) ?
> >>>>
> >>>> Perhaps it is a good idea to first post an RFC with an uAPI proposal
> >>>> on how to
> >>>> handle secure video. I suspect this isn't mediatek specific, other
> >>>> SoCs with
> >>>> tee support could use this as well.
> >>>>
> >>>> As Nicolas said, it's long known to be a gap in our media support, so
> >>>> it is
> >>>> really great that you started work on this, but you need to look at
> >>>> this from
> >>>> a more generic point-of-view, and not mediatek-specific.
> >>>>
> >>>
> >>> Whether your have any advice about how to do a more generic driver to
> >>> handle secure video playback?
> >>>
> >>> There are several kind of buffer: output queue buffer/capture queue
> >>> buffer/working buffer.
> >>>
> >>> output and capture queue buffer: user space will call tee related
> >>> interface to allocate secure handle. Will convert to secure handle with
> >>> v4l2 framework, then send secure handle to optee-os.
> >>>
> >>> working buffer: calling dma_heap and dma_buf to get secure memory
> >>> handle, then covert secure iova in optee-os.
> >>>
> >>> Using the same kernel driver for svp and non-svp playback, just the
> >>> buffer type are different. Normal is iova and secure is secure handle.
> >>>
> >>> User driver will tell the kernel driver with CID control whether the
> >>> current playback is svp or non-svp.
> >>
> >> My understanding is that when you switch to secure mode, the driver makes
> >> some optee calls to set everything up. And userspace needs a way convert a
> >> dmabuf fd to a 'secure handle', which appears to be the DMA address of the
> >> buffer. Who uses that handle?
> >
> > The only user space usage for getting the 'secure handle' from an fd
> > is when that memory is written to. This is done when the TEE decrypts
> > the video contents. User space sends the encrypted video + 'secure
> > handle' to the TEE, and the TEE decrypts the contents to the memory
> > associated with the 'secure handle'. Then the 'secure handle' is
> > passed into the TEE again with the v4l2 driver to use as the source
> > for video decoding (but w/ v4l2, user space is passing in fds).
>
> I think I need some more background. This series is to support a 'Secure Video
> Processor' (at least, that's what svp stands for I believe, something that
> is not mentioned anywhere in this series, BTW) which is used to decode an
> encrypted h264 stream.
SVP = Secure Video Path, which is explained in what you linked to below.
>
> First question: how is that stream encrypted? Is that according to some standard?
> Nothing is mentioned about that.
The TEE does the decryption of the incoming stream to the secure
buffer...and that is then fed into the output queue of v4l2. So
there's no handling of encrypted content in the kernel patches...it's
just about handling secure buffers and secure surfaces.
>
> I gather that the encrypted stream is fed to the codec as usual (i.e. just put it
> in the output buffer and queue it to the codec), nothing special is needed for that.
> Except, how does the hardware know it is encrypted? I guess that's where the
> control comes in, you have to turn on SVP mode first.
Yeah, the driver does need to know if the FDs are from secure or
non-secure memory...which is what the SVP control was about.
>
> For the capture buffers you need to provide buffers from secure/trusted memory.
> That's a dmabuf fd, but where does that come from?
That fd is allocated from the secure dma-buf heap which is being
proposed in another patchset.
https://lore.kernel.org/linux-mediatek/20230911023038.30649-1-yong.wu@xxxxxxxxxxxx/
>
> I saw this message:
>
> https://lore.kernel.org/linux-media/CAPj87rOHctwHJM-7HiQpt8Q0b09x0WWw_T4XsL0qT=dS+XzyZQ@xxxxxxxxxxxxxx/T/#u
>
> so I expect that's where it comes from. But I agree that getting this from dma-heaps
> seems more natural.
>
> I assume that those capture buffers are inaccessible from the CPU? (Hence 'secure')
Correct
>
> For actually displaying these secure buffers you would use drm, and I assume that
> the hardware would mix in the contents of the secure buffer into the video output
> pipeline? I.e., the actual contents remain inaccessible. And that the video output
> (HDMI or DisplayPort) is using HDCP?
Correct
>
> >
> >>
> >> In any case, using a control to switch to secure mode and using a control
> >> to convert a dmabuf fd to a secure handle seems a poor choice to me.
> >>
> >> I was wondering if it wouldn't be better to create a new V4L2_MEMORY_ type,
> >> e.g. V4L2_MEMORY_DMABUF_SECURE (or perhaps _DMABUF_OPTEE). That ensures that
> >> once you create buffers for the first time, the driver can switch into secure
> >> mode, and until all buffers are released again you know that the driver will
> >> stay in secure mode.
> >
> > Why do you think the control for setting secure mode is a poor choice?
> > There's various places in the driver code where functionality changes
> > based on being secure/non-secure mode, so this is very much a 'global'
> > setting for the driver. It could be inferred based off a new memory
> > type for the queues...which then sets that flag in the driver; but
> > that seems like it would be more fragile and would require checking
> > for incompatible output/capture memory types. I'm not against another
> > way of doing this; but didn't see why you think the proposed method is
> > a poor choice.
>
> I assume you are either decoding to secure memory all the time, or not
> at all. That's something you would want to select the moment you allocate
> the first buffer. Using the V4L2_MEMORY_ value would be the natural place
> for that. A control can typically be toggled at any time, and it makes
> no sense to do that for secure streaming.
Ahh ok, good point about the control being able to be toggled at any
time. So adding a new V4L2_MEMORY_ type would make sense relating to
that.
>
> Related to that: if you pass a dmabuf fd you will need to check somewhere
> if the fd points to secure memory or not. You don't want to mix the two
> but you want to check that at VIDIOC_QBUF time.
>
> Note that the V4L2_MEMORY_ value is already checked in the v4l2 core,
> drivers do not need to do that.
>
> >
> >>
> >> For converting the dmabuf fd into a secure handle: a new ioctl similar to
> >> VIDIOC_EXPBUF might be more suited for that.
> >
> > I actually think the best way for converting the dmabuf fd into a
> > secure handle would be another ioctl in the dma-heap driver...since
> > that's where the memory is actually allocated from. But this really
> > depends on upstream maintainers and what they are comfortable with.
>
> That feels like a more natural place of doing this.
>
> Regards,
>
>         Hans
>
> >
> >>
> >> Note that I am the first to admit that I have no experience with secure
> >> video pipelines or optee-os, so I am looking at this purely from an uAPI
> >> perspective.
> >>
> >> Regards,
> >>
> >>         Hans
> >>
> >>>
> >>> Best Regards,
> >>> Yunfei Dong
> >>>> Regards,
> >>>>
> >>>> Hans
> >>>>
> >>>>>
> >>>>> regards,
> >>>>> Nicolas
> >>>>>
> >>>>> p.s. you forgot to document your control in the RST doc, please do
> >>>>
> >>>> in following
> >>>>> release.
> >>>>>
> >>>>>> +ctx->is_svp_mode = ctrl->val;
> >>>>>> +
> >>>>>> +if (ctx->is_svp_mode) {
> >>>>>> +ret = mtk_vcodec_dec_optee_open(ctx->dev->optee_private);
> >>>>>> +if (ret)
> >>>>>> +mtk_v4l2_vdec_err(ctx, "open secure mode failed.");
> >>>>>> +else
> >>>>>> +mtk_v4l2_vdec_dbg(3, ctx, "decoder in secure mode: %d", ctrl-
> >>>>>
> >>>>> val);
> >>>>>> +}
> >>>>>> +break;
> >>>>>>  default:
> >>>>>>  mtk_v4l2_vdec_dbg(3, ctx, "Not supported to set ctrl id:
> >>>>>> 0x%x\n",
> >>>>
> >>>> hdr_ctrl->id);
> >>>>>>  return ret;
> >>>>>> @@ -573,7 +584,7 @@ static int mtk_vcodec_dec_ctrls_setup(struct
> >>>>
> >>>> mtk_vcodec_dec_ctx *ctx)
> >>>>>>  unsigned int i;
> >>>>>>  struct v4l2_ctrl *ctrl;
> >>>>>>
> >>>>>> -v4l2_ctrl_handler_init(&ctx->ctrl_hdl, NUM_CTRLS + 1);
> >>>>>> +v4l2_ctrl_handler_init(&ctx->ctrl_hdl, NUM_CTRLS + 2);
> >>>>>>  if (ctx->ctrl_hdl.error) {
> >>>>>>  mtk_v4l2_vdec_err(ctx, "v4l2_ctrl_handler_init failed\n");
> >>>>>>  return ctx->ctrl_hdl.error;
> >>>>>> @@ -592,6 +603,8 @@ static int mtk_vcodec_dec_ctrls_setup(struct
> >>>>
> >>>> mtk_vcodec_dec_ctx *ctx)
> >>>>>>
> >>>>>>  ctrl = v4l2_ctrl_new_std(&ctx->ctrl_hdl,
> >>>>
> >>>> &mtk_vcodec_dec_ctrl_ops,
> >>>>>>   V4L2_CID_MPEG_MTK_GET_SECURE_HANDLE, 0, 65535, 1, 0);
> >>>>>> +ctrl = v4l2_ctrl_new_std(&ctx->ctrl_hdl,
> >>>>
> >>>> &mtk_vcodec_dec_ctrl_ops,
> >>>>>> + V4L2_CID_MPEG_MTK_SET_SECURE_MODE, 0, 65535, 1, 0);
> >>>>>>
> >>>>>>  v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
> >>>>>>
> >>>>>> diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c
> >>>>
> >>>> b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
> >>>>>> index d8cf01f76aab..a507045a3f30 100644
> >>>>>> --- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c
> >>>>>> +++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
> >>>>>> @@ -1042,6 +1042,7 @@ const char *v4l2_ctrl_get_name(u32 id)
> >>>>>>  case V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES:return
> >>>>>> "Reference
> >>>>
> >>>> Frames for a P-Frame";
> >>>>>>  case V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR:return "Prepend
> >>>>
> >>>> SPS and PPS to IDR";
> >>>>>>  case V4L2_CID_MPEG_MTK_GET_SECURE_HANDLE:return "MediaTek
> >>>>>> Decoder
> >>>>
> >>>> get secure handle";
> >>>>>> +case V4L2_CID_MPEG_MTK_SET_SECURE_MODE:return "MediaTek Decoder
> >>>>
> >>>> set secure mode";
> >>>>>>
> >>>>>>  /* AV1 controls */
> >>>>>>  case V4L2_CID_MPEG_VIDEO_AV1_PROFILE:return "AV1 Profile";
> >>>>>> @@ -1442,6 +1443,10 @@ void v4l2_ctrl_fill(u32 id, const char
> >>>>
> >>>> **name, enum v4l2_ctrl_type *type,
> >>>>>>  *type = V4L2_CTRL_TYPE_INTEGER;
> >>>>>>  *flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
> >>>>>>  break;
> >>>>>> +case V4L2_CID_MPEG_MTK_SET_SECURE_MODE:
> >>>>>> +*type = V4L2_CTRL_TYPE_INTEGER;
> >>>>>> +*flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
> >>>>>> +break;
> >>>>>>  case V4L2_CID_USER_CLASS:
> >>>>>>  case V4L2_CID_CAMERA_CLASS:
> >>>>>>  case V4L2_CID_CODEC_CLASS:
> >>>>>> diff --git a/include/uapi/linux/v4l2-controls.h
> >>>>
> >>>> b/include/uapi/linux/v4l2-controls.h
> >>>>>> index 7b3694985366..88e90d943e38 100644
> >>>>>> --- a/include/uapi/linux/v4l2-controls.h
> >>>>>> +++ b/include/uapi/linux/v4l2-controls.h
> >>>>>> @@ -957,6 +957,7 @@ enum v4l2_mpeg_mfc51_video_force_frame_type {
> >>>>>>  /*  MPEG-class control IDs specific to the MediaTek Decoder
> >>>>
> >>>> driver as defined by V4L2 */
> >>>>>>  #define V4L2_CID_MPEG_MTK_BASE(V4L2_CTRL_CLASS_CODEC | 0x2000)
> >>>>>>  #define
> >>>>
> >>>> V4L2_CID_MPEG_MTK_GET_SECURE_HANDLE(V4L2_CID_MPEG_MTK_BASE+8)
> >>>>>> +#define
> >>>>
> >>>> V4L2_CID_MPEG_MTK_SET_SECURE_MODE(V4L2_CID_MPEG_MTK_BASE+9)
> >>>>>>
> >>>>>>  /*  Camera class control IDs */
> >>>>>>
> >>
> >>
> >> _______________________________________________
> >> linux-arm-kernel mailing list
> >> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux