From: Brian Norris <computersforpeace@xxxxxxxxx>
Wakeable interrupts might be pending at boot/init time, because wakeup
interrupts might have triggered a resume from S5. So don't clear such
wakeups.
This means that any driver which requests a wakeable interrupt bit
should be prepared to handle an interrupt as soon as they call
request_irq(). (This is technically already the correct development
practice, but some drivers probably expect not to receive interrupts
until they have performed some I/O.)
Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx>
Signed-off-by: Kevin Cernekee <cernekee@xxxxxxxxx>
---
drivers/irqchip/irq-brcmstb-l2.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c
index 313c2c6..d6bcc6b 100644
--- a/drivers/irqchip/irq-brcmstb-l2.c
+++ b/drivers/irqchip/irq-brcmstb-l2.c
@@ -136,7 +136,11 @@ int __init brcmstb_l2_intc_of_init(struct device_node *np,
/* Disable all interrupts by default */
writel(0xffffffff, data->base + CPU_MASK_SET);
- writel(0xffffffff, data->base + CPU_CLEAR);
+
+ /* Wakeup interrupts may be retained from S5 (cold boot) */
+ data->can_wake = of_property_read_bool(np, "brcm,irq-can-wake");
+ if (!data->can_wake)
+ writel(0xffffffff, data->base + CPU_CLEAR);
data->parent_irq = irq_of_parse_and_map(np, 0);
if (!data->parent_irq) {
@@ -188,8 +192,7 @@ int __init brcmstb_l2_intc_of_init(struct device_node *np,
ct->chip.irq_suspend = brcmstb_l2_intc_suspend;
ct->chip.irq_resume = brcmstb_l2_intc_resume;
- if (of_property_read_bool(np, "brcm,irq-can-wake")) {
- data->can_wake = true;
+ if (data->can_wake) {
/* This IRQ chip can wake the system, set all child interrupts
* in wake_enabled mask
*/
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
