From: Chris Morgan <macromorgan@xxxxxxxxxxx>
Enable USB2 (EHCI and OCHI mode) support for the Indiedroid Nova. This
adds support for USB for the 4 full size USB-A ports. Note that USB 3
(the two blue full-size USB-A ports) is still outstanding, as is
support for USB on the USB-C ports. The controller is not yet supported
for these ports.
Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
---
.../dts/rockchip/rk3588s-indiedroid-nova.dts | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 646f49cc9e53..1e2336d3065b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -751,6 +751,24 @@ &tsadc {
status = "okay";
};
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+};
+
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
@@ -775,3 +793,19 @@ bluetooth {
pinctrl-names = "default";
};
};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
--
2.34.1
