This patch set add USB device controller for the NPCM Baseboard Management Controllers (BMC). NPCM UDC driver is a part of the USB ChipIdea driver. The NPCM UDC is using the CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag therefor, this patch set should apply after usb: chipidea: add CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag commit will apply. BMC NPCM7XX and BMC NPCM8XX has ten identical NPCM UDC modules, The NPCM UDC were tested on NPCM845 evaluation board. Tomer Maimon (2): dt-binding: usb: ci-hdrc-usb2: document Nuvoton NPCM supprt usb: chipidea: Add support for NPCM .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 16 +++ drivers/usb/chipidea/Kconfig | 4 + drivers/usb/chipidea/Makefile | 1 + drivers/usb/chipidea/ci_hdrc_npcm.c | 126 ++++++++++++++++++ 4 files changed, 147 insertions(+) create mode 100644 drivers/usb/chipidea/ci_hdrc_npcm.c -- 2.33.0