[PATCH 1/6] arm64: xilinx: Do not use '_' in DT node names

[Michal Simek <michal.simek@xxxxxxx>]

Character '_' not recommended in node name. Use '-' instead.
Pretty much run seds below for node names.
s/zynqmp_ipi/zynqmp-ipi/
s/nvmem_firmware/nvmem-firmware/
s/soc_revision/soc-revision/
s/si5335_/si5335-/

Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
---

 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 4 ++--
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi            | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index d0091d3cb764..52f998c22538 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -123,13 +123,13 @@ ina226 {
 		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
 	};
 
-	si5335_0: si5335_0 { /* clk0_usb - u23 */
+	si5335_0: si5335-0 { /* clk0_usb - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5335_1: si5335_1 { /* clk1_dp - u23 */
+	si5335_1: si5335-1 { /* clk1_dp - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index b61fc99cd911..e50e95cbe817 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -129,7 +129,7 @@ rproc_1_fw_image: memory@3ef00000 {
 		};
 	};
 
-	zynqmp_ipi: zynqmp_ipi {
+	zynqmp_ipi: zynqmp-ipi {
 		bootph-all;
 		compatible = "xlnx,zynqmp-ipi-mailbox";
 		interrupt-parent = <&gic>;
@@ -194,12 +194,12 @@ zynqmp_power: zynqmp-power {
 				mbox-names = "tx", "rx";
 			};
 
-			nvmem_firmware {
+			nvmem-firmware {
 				compatible = "xlnx,zynqmp-nvmem-fw";
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				soc_revision: soc_revision@0 {
+				soc_revision: soc-revision@0 {
 					reg = <0x0 0x4>;
 				};
 			};
-- 
2.36.1