This series adds support for onsemi's NCN26010 10BASE-T1S Ethernet controller. This is a combined MAC/PHY that uses SPI to interface to a microcontroller. The patches include devicetree bindings for the NCN26000 PHY and the NCN26010, required changes to the NCN26000 PHY driver and the NCN26010 driver itself. Jay Monkman (4): dt-bindings: net: Add bindings for onsemi NCN26000 PHY dt-bindings: net: Add onsemi NCN26010 ethernet controller net: phy: Add GPIO and DT support to NCN26000 net/onsemi: Add NCN26010 driver .../devicetree/bindings/net/onnn,macphy.yaml | 94 + .../bindings/net/onnn,ncn26000.yaml | 177 ++ drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/onsemi/Kconfig | 27 + drivers/net/ethernet/onsemi/Makefile | 9 + drivers/net/ethernet/onsemi/onsemi_macphy.h | 298 +++ .../net/ethernet/onsemi/onsemi_macphy_core.c | 2149 +++++++++++++++++ .../ethernet/onsemi/onsemi_macphy_ethtool.c | 179 ++ drivers/net/phy/ncn26000.c | 467 +++- 10 files changed, 3394 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/onnn,macphy.yaml create mode 100644 Documentation/devicetree/bindings/net/onnn,ncn26000.yaml create mode 100644 drivers/net/ethernet/onsemi/Kconfig create mode 100644 drivers/net/ethernet/onsemi/Makefile create mode 100644 drivers/net/ethernet/onsemi/onsemi_macphy.h create mode 100644 drivers/net/ethernet/onsemi/onsemi_macphy_core.c create mode 100644 drivers/net/ethernet/onsemi/onsemi_macphy_ethtool.c -- 2.40.1
