From: Benjamin Bara <benjamin.bara@xxxxxxxxxxx>
One of the key parts to enable dynamic clock propagation on the imx8m,
are the consumer-facing composites. They currently only divide,
therefore the parent must be already quite good in shape to provide a
close enough rate. Therefore, the parents are usually hard-assigned in
the dt. To workaround that, this commit enables propagation to the
parent of the composite.
If a rate cannot be reached exactly by only dividing, the parent is
asked (for now simply for the exact required rate - no dividers taken
into account). If the parent already has a configured rate, it's the
parent's job to ensure that all children are satisfied.
By using a notifier, the propagation-enabled clocks listen to clock
changes coming from the parent. If one is happening, it's the composites
job to verify if the rate is satisfying and if it is an intended change.
Otherwise, countermeasures have to be taken into account (e.g. setting
the rate back or aborting the change).
Signed-off-by: Benjamin Bara <benjamin.bara@xxxxxxxxxxx>
---
drivers/clk/imx/clk-composite-8m.c | 71 ++++++++++++++++++++++++++++++++++++--
1 file changed, 68 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/imx/clk-composite-8m.c b/drivers/clk/imx/clk-composite-8m.c
index a121f1285110..068f61df28b1 100644
--- a/drivers/clk/imx/clk-composite-8m.c
+++ b/drivers/clk/imx/clk-composite-8m.c
@@ -4,6 +4,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/io.h>
@@ -119,8 +120,12 @@ static int imx8m_divider_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_divider *divider = to_clk_divider(hw);
+ struct clk_hw *parent = clk_hw_get_parent(hw);
int prediv_value;
int div_value;
+ unsigned long target_rate;
+ struct clk_rate_request req_parent;
+ int ret;
/* if read only, just return current value */
if (divider->flags & CLK_DIVIDER_READ_ONLY) {
@@ -140,9 +145,29 @@ static int imx8m_divider_determine_rate(struct clk_hw *hw,
divider->flags, prediv_value * div_value);
}
- return divider_determine_rate(hw, req, divider->table,
- PCG_PREDIV_WIDTH + PCG_DIV_WIDTH,
- divider->flags);
+ target_rate = req->rate;
+ ret = divider_determine_rate(hw, req, divider->table,
+ PCG_PREDIV_WIDTH + PCG_DIV_WIDTH,
+ divider->flags);
+ if (ret || req->rate == target_rate)
+ return ret;
+
+ /*
+ * If re-configuring the parent gives a better rate, do this instead.
+ * Avoid re-parenting for now, which could be done first if a possible
+ * parent already has a satisfying rate. The implementation does not
+ * consider the dividers between the parent and the current clock.
+ */
+ clk_hw_forward_rate_request(hw, req, parent, &req_parent, target_rate);
+ if (__clk_determine_rate(parent, &req_parent))
+ return 0;
+
+ if (abs(req_parent.rate - target_rate) < abs(req->rate - target_rate)) {
+ req->rate = req_parent.rate;
+ req->best_parent_rate = req_parent.rate;
+ }
+
+ return 0;
}
static const struct clk_ops imx8m_clk_composite_divider_ops = {
@@ -198,6 +223,33 @@ static const struct clk_ops imx8m_clk_composite_mux_ops = {
.determine_rate = imx8m_clk_composite_mux_determine_rate,
};
+static int imx8m_clk_composite_notifier_fn(struct notifier_block *notifier,
+ unsigned long code, void *data)
+{
+ struct clk_notifier_data *cnd = data;
+ struct clk_hw *hw = __clk_get_hw(cnd->clk);
+
+ if (code != PRE_RATE_CHANGE)
+ return NOTIFY_OK;
+
+ if (!__clk_is_rate_set(cnd->clk))
+ return NOTIFY_OK;
+
+ /*
+ * Consumer of a composite-m8 clock usually use the root clk, a gate
+ * connected to the composite (e.g. media_ldb and media_ldb_root).
+ * Therefore, evaluate the trigger's parent too.
+ */
+ if (cnd->clk != cnd->trigger && cnd->clk != clk_get_parent(cnd->trigger))
+ return notifier_from_errno(clk_hw_set_rate(hw, cnd->old_rate));
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block imx8m_clk_composite_notifier = {
+ .notifier_call = imx8m_clk_composite_notifier_fn,
+};
+
struct clk_hw *__imx8m_clk_hw_composite(const char *name,
const char * const *parent_names,
int num_parents, void __iomem *reg,
@@ -211,6 +263,7 @@ struct clk_hw *__imx8m_clk_hw_composite(const char *name,
struct clk_mux *mux = NULL;
const struct clk_ops *divider_ops;
const struct clk_ops *mux_ops;
+ int ret;
mux = kzalloc(sizeof(*mux), GFP_KERNEL);
if (!mux)
@@ -268,6 +321,18 @@ struct clk_hw *__imx8m_clk_hw_composite(const char *name,
if (IS_ERR(hw))
goto fail;
+ /*
+ * register a notifier which should switch back to the configured rate
+ * if the rate is going to be changed unintentionally.
+ */
+ if (flags & CLK_SET_RATE_PARENT) {
+ ret = clk_notifier_register(hw->clk, &imx8m_clk_composite_notifier);
+ if (ret) {
+ hw = ERR_PTR(ret);
+ goto fail;
+ }
+ }
+
return hw;
fail:
--
2.34.1
