The wm8782 supports up to 192kHz audio when pins are set correctly. Instead of hardcoding which rates are supported constrain them at runtime based on a max_rate variable. Signed-off-by: John Watts <contact@xxxxxxxxxx> --- sound/soc/codecs/wm8782.c | 42 ++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 12 deletions(-) diff --git a/sound/soc/codecs/wm8782.c b/sound/soc/codecs/wm8782.c index 95ff4339d103..f3dc87b92b1e 100644 --- a/sound/soc/codecs/wm8782.c +++ b/sound/soc/codecs/wm8782.c @@ -23,6 +23,27 @@ #include <sound/initval.h> #include <sound/soc.h> +/* regulator power supply names */ +static const char *supply_names[] = { + "Vdda", /* analog supply, 2.7V - 3.6V */ + "Vdd", /* digital supply, 2.7V - 5.5V */ +}; + +struct wm8782_priv { + struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; + int max_rate; +}; + +static int wm8782_dai_startup(struct snd_pcm_substream *sub, struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = sub->runtime; + struct wm8782_priv *priv = + snd_soc_component_get_drvdata(dai->component); + + return snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE, + 8000, priv->max_rate); +} + static const struct snd_soc_dapm_widget wm8782_dapm_widgets[] = { SND_SOC_DAPM_INPUT("AINL"), SND_SOC_DAPM_INPUT("AINR"), @@ -33,28 +54,22 @@ static const struct snd_soc_dapm_route wm8782_dapm_routes[] = { { "Capture", NULL, "AINR" }, }; +static const struct snd_soc_dai_ops wm8782_dai_ops = { + .startup = &wm8782_dai_startup, +}; + static struct snd_soc_dai_driver wm8782_dai = { .name = "wm8782", .capture = { .stream_name = "Capture", .channels_min = 2, .channels_max = 2, - /* For configurations with FSAMPEN=0 */ - .rates = SNDRV_PCM_RATE_8000_48000, + .rates = SNDRV_PCM_RATE_8000_192000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE, }, -}; - -/* regulator power supply names */ -static const char *supply_names[] = { - "Vdda", /* analog supply, 2.7V - 3.6V */ - "Vdd", /* digital supply, 2.7V - 5.5V */ -}; - -struct wm8782_priv { - struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; + .ops = &wm8782_dai_ops, }; static int wm8782_soc_probe(struct snd_soc_component *component) @@ -121,6 +136,9 @@ static int wm8782_probe(struct platform_device *pdev) if (ret < 0) return ret; + /* For configurations with FSAMPEN=0 */ + priv->max_rate = 48000; + return devm_snd_soc_register_component(&pdev->dev, &soc_component_dev_wm8782, &wm8782_dai, 1); } -- 2.42.0