Each item of the resets property should define a reset. Split the item with two resets on the ethernet node into two separate items. Sort the items of the clocks property to the same line as a trivial change. Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx> --- arch/mips/boot/dts/ralink/mt7621.dtsi | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi index 7caed0d14f11..35a10258f235 100644 --- a/arch/mips/boot/dts/ralink/mt7621.dtsi +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi @@ -300,14 +300,13 @@ ethernet: ethernet@1e100000 { compatible = "mediatek,mt7621-eth"; reg = <0x1e100000 0x10000>; - clocks = <&sysc MT7621_CLK_FE>, - <&sysc MT7621_CLK_ETH>; + clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>; clock-names = "fe", "ethif"; #address-cells = <1>; #size-cells = <0>; - resets = <&sysc MT7621_RST_FE &sysc MT7621_RST_ETH>; + resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>; reset-names = "fe", "eth"; interrupt-parent = <&gic>; -- 2.39.2