Re: [PATCH v5 3/3] net: stmmac: Add glue layer for Loongson-1 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 14, 2023 at 07:44:35PM +0800, Keguang Zhang wrote:
> This glue driver is created based on the arch-code
> implemented earlier with the platform-specific settings.
> 
> Use syscon for SYSCON register access.
> 
> And modify MAINTAINERS to add a new F: entry for this driver.
> 
> Partially based on the previous work by Serge Semin.
> 
> Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>

Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>

-Serge(y)

> ---
> V4 -> V5: Replace stmmac_probe_config_dt() with devm_stmmac_probe_config_dt()
>           Replace stmmac_pltfr_probe() with devm_stmmac_pltfr_probe()
>           Add a new F: entry for this driver.
> V3 -> V4: Drop ls1x_dwmac_syscon definition and its instances
>           Drop three redundant fields from the ls1x_dwmac structure
>           Drop the ls1x_dwmac_init() method.
>           Some minor improvements
> V2 -> V3: Determine the device ID by physical
>           base address(suggested by Serge Semin)
>           Use regmap instead of regmap fields
>           Use syscon_regmap_lookup_by_phandle()
>           Some minor fixes
> V1 -> V2: Fix the build errors due to CONFIG_OF being unset
>           Change struct reg_field definitions to const
>           Rename the syscon property to "loongson,dwmac-syscon"
>           Add MII PHY mode for LS1C
> 
>  MAINTAINERS                                   |   1 +
>  drivers/net/ethernet/stmicro/stmmac/Kconfig   |  11 +
>  drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
>  .../ethernet/stmicro/stmmac/dwmac-loongson1.c | 209 ++++++++++++++++++
>  4 files changed, 222 insertions(+)
>  create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e514b53fb225..b71aff479a8c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14383,6 +14383,7 @@ F:	Documentation/devicetree/bindings/*/loongson,ls1*.yaml
>  F:	arch/mips/include/asm/mach-loongson32/
>  F:	arch/mips/loongson32/
>  F:	drivers/*/*loongson1*
> +F:	drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c
>  
>  MIPS/LOONGSON2EF ARCHITECTURE
>  M:	Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index 06c6871f8788..a2b9e289aa36 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -239,6 +239,17 @@ config DWMAC_INTEL_PLAT
>  	  the stmmac device driver. This driver is used for the Intel Keem Bay
>  	  SoC.
>  
> +config DWMAC_LOONGSON1
> +	tristate "Loongson1 GMAC support"
> +	default MACH_LOONGSON32
> +	depends on OF && (MACH_LOONGSON32 || COMPILE_TEST)
> +	help
> +	  Support for ethernet controller on Loongson1 SoC.
> +
> +	  This selects Loongson1 SoC glue layer support for the stmmac
> +	  device driver. This driver is used for Loongson1-based boards
> +	  like Loongson LS1B/LS1C.
> +
>  config DWMAC_TEGRA
>  	tristate "NVIDIA Tegra MGBE support"
>  	depends on ARCH_TEGRA || COMPILE_TEST
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
> index 5b57aee19267..80e598bd4255 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
> @@ -29,6 +29,7 @@ obj-$(CONFIG_DWMAC_SUNXI)	+= dwmac-sunxi.o
>  obj-$(CONFIG_DWMAC_SUN8I)	+= dwmac-sun8i.o
>  obj-$(CONFIG_DWMAC_DWC_QOS_ETH)	+= dwmac-dwc-qos-eth.o
>  obj-$(CONFIG_DWMAC_INTEL_PLAT)	+= dwmac-intel-plat.o
> +obj-$(CONFIG_DWMAC_LOONGSON1)	+= dwmac-loongson1.o
>  obj-$(CONFIG_DWMAC_GENERIC)	+= dwmac-generic.o
>  obj-$(CONFIG_DWMAC_IMX8)	+= dwmac-imx.o
>  obj-$(CONFIG_DWMAC_TEGRA)	+= dwmac-tegra.o
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c
> new file mode 100644
> index 000000000000..3e86810717d3
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c
> @@ -0,0 +1,209 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Loongson-1 DWMAC glue layer
> + *
> + * Copyright (C) 2011-2023 Keguang Zhang <keguang.zhang@xxxxxxxxx>
> + */
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include "stmmac.h"
> +#include "stmmac_platform.h"
> +
> +#define LS1B_GMAC0_BASE		(0x1fe10000)
> +#define LS1B_GMAC1_BASE		(0x1fe20000)
> +
> +/* Loongson-1 SYSCON Registers */
> +#define LS1X_SYSCON0		(0x0)
> +#define LS1X_SYSCON1		(0x4)
> +
> +/* Loongson-1B SYSCON Register Bits */
> +#define GMAC1_USE_UART1		BIT(4)
> +#define GMAC1_USE_UART0		BIT(3)
> +
> +#define GMAC1_SHUT		BIT(13)
> +#define GMAC0_SHUT		BIT(12)
> +
> +#define GMAC1_USE_TXCLK		BIT(3)
> +#define GMAC0_USE_TXCLK		BIT(2)
> +#define GMAC1_USE_PWM23		BIT(1)
> +#define GMAC0_USE_PWM01		BIT(0)
> +
> +/* Loongson-1C SYSCON Register Bits */
> +#define GMAC_SHUT		BIT(6)
> +
> +#define PHY_INTF_SELI		GENMASK(30, 28)
> +#define PHY_INTF_MII		FIELD_PREP(PHY_INTF_SELI, 0)
> +#define PHY_INTF_RMII		FIELD_PREP(PHY_INTF_SELI, 4)
> +
> +struct ls1x_dwmac {
> +	struct plat_stmmacenet_data *plat_dat;
> +	struct regmap *regmap;
> +};
> +
> +static int ls1b_dwmac_syscon_init(struct platform_device *pdev, void *priv)
> +{
> +	struct ls1x_dwmac *dwmac = priv;
> +	struct plat_stmmacenet_data *plat = dwmac->plat_dat;
> +	struct regmap *regmap = dwmac->regmap;
> +	struct resource *res;
> +	unsigned long reg_base;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "Could not get IO_MEM resources\n");
> +		return -EINVAL;
> +	}
> +	reg_base = (unsigned long)res->start;
> +
> +	if (reg_base == LS1B_GMAC0_BASE) {
> +		switch (plat->phy_interface) {
> +		case PHY_INTERFACE_MODE_RGMII_ID:
> +			regmap_update_bits(regmap, LS1X_SYSCON0,
> +					   GMAC0_USE_TXCLK | GMAC0_USE_PWM01,
> +					   0);
> +			break;
> +		case PHY_INTERFACE_MODE_MII:
> +			regmap_update_bits(regmap, LS1X_SYSCON0,
> +					   GMAC0_USE_TXCLK | GMAC0_USE_PWM01,
> +					   GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
> +			break;
> +		default:
> +			dev_err(&pdev->dev, "Unsupported PHY mode %u\n",
> +				plat->phy_interface);
> +			return -EOPNOTSUPP;
> +		}
> +
> +		regmap_update_bits(regmap, LS1X_SYSCON0, GMAC0_SHUT, 0);
> +	} else if (reg_base == LS1B_GMAC1_BASE) {
> +		regmap_update_bits(regmap, LS1X_SYSCON0,
> +				   GMAC1_USE_UART1 | GMAC1_USE_UART0,
> +				   GMAC1_USE_UART1 | GMAC1_USE_UART0);
> +
> +		switch (plat->phy_interface) {
> +		case PHY_INTERFACE_MODE_RGMII_ID:
> +			regmap_update_bits(regmap, LS1X_SYSCON1,
> +					   GMAC1_USE_TXCLK | GMAC1_USE_PWM23,
> +					   0);
> +
> +			break;
> +		case PHY_INTERFACE_MODE_MII:
> +			regmap_update_bits(regmap, LS1X_SYSCON1,
> +					   GMAC1_USE_TXCLK | GMAC1_USE_PWM23,
> +					   GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
> +			break;
> +		default:
> +			dev_err(&pdev->dev, "Unsupported PHY mode %u\n",
> +				plat->phy_interface);
> +			return -EOPNOTSUPP;
> +		}
> +
> +		regmap_update_bits(regmap, LS1X_SYSCON1, GMAC1_SHUT, 0);
> +	} else {
> +		dev_err(&pdev->dev, "Invalid Ethernet MAC base address %lx",
> +			reg_base);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ls1c_dwmac_syscon_init(struct platform_device *pdev, void *priv)
> +{
> +	struct ls1x_dwmac *dwmac = priv;
> +	struct plat_stmmacenet_data *plat = dwmac->plat_dat;
> +	struct regmap *regmap = dwmac->regmap;
> +
> +	switch (plat->phy_interface) {
> +	case PHY_INTERFACE_MODE_MII:
> +		regmap_update_bits(regmap, LS1X_SYSCON1, PHY_INTF_SELI,
> +				   PHY_INTF_MII);
> +		break;
> +	case PHY_INTERFACE_MODE_RMII:
> +		regmap_update_bits(regmap, LS1X_SYSCON1, PHY_INTF_SELI,
> +				   PHY_INTF_RMII);
> +		break;
> +	default:
> +		dev_err(&pdev->dev, "Unsupported PHY-mode %u\n",
> +			plat->phy_interface);
> +		return -EOPNOTSUPP;
> +	}
> +
> +	regmap_update_bits(regmap, LS1X_SYSCON0, GMAC0_SHUT, 0);
> +
> +	return 0;
> +}
> +
> +static int ls1x_dwmac_probe(struct platform_device *pdev)
> +{
> +	struct plat_stmmacenet_data *plat_dat;
> +	struct stmmac_resources stmmac_res;
> +	struct regmap *regmap;
> +	struct ls1x_dwmac *dwmac;
> +	int (*init)(struct platform_device *pdev, void *priv);
> +	int ret;
> +
> +	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
> +	if (ret)
> +		return ret;
> +
> +	/* Probe syscon */
> +	regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> +						 "loongson,ls1-syscon");
> +	if (IS_ERR(regmap))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
> +				     "Unable to find syscon\n");
> +
> +	init = of_device_get_match_data(&pdev->dev);
> +	if (!init) {
> +		dev_err(&pdev->dev, "No of match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
> +	if (!dwmac)
> +		return -ENOMEM;
> +
> +	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
> +	if (IS_ERR(plat_dat))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(plat_dat),
> +				     "dt configuration failed\n");
> +
> +	plat_dat->bsp_priv = dwmac;
> +	plat_dat->init = init;
> +	dwmac->plat_dat = plat_dat;
> +	dwmac->regmap = regmap;
> +
> +	return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
> +}
> +
> +static const struct of_device_id ls1x_dwmac_match[] = {
> +	{
> +		.compatible = "loongson,ls1b-gmac",
> +		.data = &ls1b_dwmac_syscon_init,
> +	},
> +	{
> +		.compatible = "loongson,ls1c-emac",
> +		.data = &ls1c_dwmac_syscon_init,
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, ls1x_dwmac_match);
> +
> +static struct platform_driver ls1x_dwmac_driver = {
> +	.probe = ls1x_dwmac_probe,
> +	.driver = {
> +		.name = "loongson1-dwmac",
> +		.of_match_table = ls1x_dwmac_match,
> +	},
> +};
> +module_platform_driver(ls1x_dwmac_driver);
> +
> +MODULE_AUTHOR("Keguang Zhang <keguang.zhang@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Loongson-1 DWMAC glue layer");
> +MODULE_LICENSE("GPL");
> -- 
> 2.39.2
> 
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux