The TPS6598x driver supports an optional high-level reset GPIO. Document the new property and add it to the example. Signed-off-by: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/usb/ti,tps6598x.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml index 5497a60cddbc..b1a621e06127 100644 --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -23,6 +23,10 @@ properties: reg: maxItems: 1 + reset-gpios: + description: GPIO used for the HRESET pin. + maxItems: 1 + wakeup-source: true interrupts: @@ -40,6 +44,7 @@ additionalProperties: true examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; @@ -56,6 +61,7 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&typec_pins>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; typec_con: connector { compatible = "usb-c-connector"; -- 2.39.2