Add devicetree binding document for Loongson-1 Ethernet controller.
And modify MAINTAINERS to add a new F: entry for
Loongson1 dt-binding documents.
Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
V4 -> V5: Add a new F: entry for Loongson1 dt-binding documents
V3 -> V4: Add "|" to description part
Amend "phy-mode" property
V2 -> V3: Split the DT-schema file into loongson,ls1b-gmac.yaml
and loongson,ls1c-emac.yaml (suggested by Serge Semin)
Change the compatibles to loongson,ls1b-gmac and loongson,ls1c-emac
Rename loongson,dwmac-syscon to loongson,ls1-syscon
Amend the title
Add description
Add Reviewed-by tag from Krzysztof Kozlowski(Sorry! I'm not sure)
V1 -> V2: Fix "clock-names" and "interrupt-names" property
Rename the syscon property to "loongson,dwmac-syscon"
Drop "phy-handle" and "phy-mode" requirement
Revert adding loongson,ls1b-dwmac/loongson,ls1c-dwmac
to snps,dwmac.yaml
.../bindings/net/loongson,ls1b-gmac.yaml | 114 ++++++++++++++++++
.../bindings/net/loongson,ls1c-emac.yaml | 113 +++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 228 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
diff --git a/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
new file mode 100644
index 000000000000..c4f3224bad38
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/loongson,ls1b-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1B Gigabit Ethernet MAC Controller
+
+maintainers:
+ - Keguang Zhang <keguang.zhang@xxxxxxxxx>
+
+description: |
+ Loongson-1B Gigabit Ethernet MAC Controller is based on
+ Synopsys DesignWare MAC (version 3.50a).
+
+ Main features
+ - Dual 10/100/1000Mbps GMAC controllers
+ - Full-duplex operation (IEEE 802.3x flow control automatic transmission)
+ - Half-duplex operation (CSMA/CD Protocol and back-pressure support)
+ - RX Checksum Offload
+ - TX Checksum insertion
+ - MII interface
+ - RGMII interface
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - loongson,ls1b-gmac
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - loongson,ls1b-gmac
+ - const: snps,dwmac-3.50a
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: stmmaceth
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: macirq
+
+ loongson,ls1-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon containing some extra configurations
+ including PHY interface mode.
+
+ phy-mode:
+ enum:
+ - mii
+ - rgmii-id
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - loongson,ls1-syscon
+
+allOf:
+ - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/loongson,ls1x-clk.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ gmac0: ethernet@1fe10000 {
+ compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a";
+ reg = <0x1fe10000 0x10000>;
+
+ clocks = <&clkc LS1X_CLKID_AHB>;
+ clock-names = "stmmaceth";
+
+ interrupt-parent = <&intc1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ loongson,ls1-syscon = <&syscon>;
+
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ snps,pbl = <1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
new file mode 100644
index 000000000000..99001b940b83
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/loongson,ls1c-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1C Ethernet MAC Controller
+
+maintainers:
+ - Keguang Zhang <keguang.zhang@xxxxxxxxx>
+
+description: |
+ Loongson-1C Ethernet MAC Controller is based on
+ Synopsys DesignWare MAC (version 3.50a).
+
+ Main features
+ - 10/100Mbps
+ - Full-duplex operation (IEEE 802.3x flow control automatic transmission)
+ - Half-duplex operation (CSMA/CD Protocol and back-pressure support)
+ - IEEE 802.1Q VLAN tag detection for reception frames
+ - MII interface
+ - RMII interface
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - loongson,ls1c-emac
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - loongson,ls1c-emac
+ - const: snps,dwmac-3.50a
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: stmmaceth
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: macirq
+
+ loongson,ls1-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon containing some extra configurations
+ including PHY interface mode.
+
+ phy-mode:
+ enum:
+ - mii
+ - rmii
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - loongson,ls1-syscon
+
+allOf:
+ - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/loongson,ls1x-clk.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ emac: ethernet@1fe10000 {
+ compatible = "loongson,ls1c-emac", "snps,dwmac-3.50a";
+ reg = <0x1fe10000 0x10000>;
+
+ clocks = <&clkc LS1X_CLKID_AHB>;
+ clock-names = "stmmaceth";
+
+ interrupt-parent = <&intc1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ loongson,ls1-syscon = <&syscon>;
+
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ snps,pbl = <1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index fa7487b7729b..e514b53fb225 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14379,6 +14379,7 @@ MIPS/LOONGSON1 ARCHITECTURE
M: Keguang Zhang <keguang.zhang@xxxxxxxxx>
L: linux-mips@xxxxxxxxxxxxxxx
S: Maintained
+F: Documentation/devicetree/bindings/*/loongson,ls1*.yaml
F: arch/mips/include/asm/mach-loongson32/
F: arch/mips/loongson32/
F: drivers/*/*loongson1*
--
2.39.2
