在 12/24/2014 07:06 AM, Dylan Reid 写道: > On Tue, Dec 23, 2014 at 1:08 AM, Jianqun Xu <jay.xu@xxxxxxxxxxxxxx> wrote: >> Set Transmit Data Level(TDL) and Receive Data Level(RDL) to 16 bits. >> Without this setting, the TDL is default to be 0x00 (means 1 bit), >> and the RDL is default to be 0x1f (means 16 bits). > > My impression from the TRM was that TDL and RDL were measured in > samples. Are you sure it's 'bits'? You are right, I'll modify the commit message next version, thank you > >> >> This patch is helpful to fix pop sound, tested on rk3288 board. >> >> Signed-off-by: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx> >> --- >> sound/soc/rockchip/rockchip_i2s.c | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c >> index c74ba37..1cd7efc 100644 >> --- a/sound/soc/rockchip/rockchip_i2s.c >> +++ b/sound/soc/rockchip/rockchip_i2s.c >> @@ -247,6 +247,10 @@ static int rockchip_i2s_hw_params(struct snd_pcm_substream *substream, >> >> regmap_update_bits(i2s->regmap, I2S_TXCR, I2S_TXCR_VDW_MASK, val); >> regmap_update_bits(i2s->regmap, I2S_RXCR, I2S_RXCR_VDW_MASK, val); >> + regmap_update_bits(i2s->regmap, I2S_DMACR, I2S_DMACR_TDL_MASK, >> + I2S_DMACR_TDL(16)); >> + regmap_update_bits(i2s->regmap, I2S_DMACR, I2S_DMACR_RDL_MASK, >> + I2S_DMACR_RDL(16)); >> >> return 0; >> } >> -- >> 1.9.1 >> >> >> _______________________________________________ >> Alsa-devel mailing list >> Alsa-devel@xxxxxxxxxxxxxxxx >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > > -- Jianqun Xu **************************************************************************** *IMPORTANT NOTICE:*This email is from Fuzhou Rockchip Electronics Co., Ltd .The contents of this email and any attachments may contain information that is privileged, confidential and/or exempt from disclosure under applicable law and relevant NDA. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information is STRICTLY PROHIBITED. Please immediately contact the sender as soon as possible and destroy the material in its entirety in any format. Thank you. **************************************************************************** -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
