Re: [PATCH 1/2] MIPS: Move device-trees into vendor sub-directories

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




2014-12-22 15:27 GMT-08:00 Andrew Bresticker <abrestic@xxxxxxxxxxxx>:
> Move the MIPS device-trees into the appropriate vendor sub-directories.
>
> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
> ---
>  arch/mips/Makefile                                 |  2 +-
>  arch/mips/boot/dts/Makefile                        | 33 ++++++++--------------
>  arch/mips/boot/dts/bcm/Makefile                    |  9 ++++++
>  arch/mips/boot/dts/{ => bcm}/bcm3384.dtsi          |  0
>  arch/mips/boot/dts/{ => bcm}/bcm93384wvg.dts       |  0

Let's use brcm here, which is the DT vendor prefix, or go full name
with broadcom, there has been enough debate in the past about this ;)

Thanks!

>  arch/mips/boot/dts/cavium-octeon/Makefile          |  9 ++++++
>  .../boot/dts/{ => cavium-octeon}/octeon_3xxx.dts   |  0
>  .../boot/dts/{ => cavium-octeon}/octeon_68xx.dts   |  0
>  arch/mips/boot/dts/lantiq/Makefile                 |  9 ++++++
>  arch/mips/boot/dts/{ => lantiq}/danube.dtsi        |  0
>  arch/mips/boot/dts/{ => lantiq}/easy50712.dts      |  0
>  arch/mips/boot/dts/mti/Makefile                    |  9 ++++++
>  arch/mips/boot/dts/{ => mti}/sead3.dts             |  0
>  arch/mips/boot/dts/netlogic/Makefile               | 12 ++++++++
>  arch/mips/boot/dts/{ => netlogic}/xlp_evp.dts      |  0
>  arch/mips/boot/dts/{ => netlogic}/xlp_fvp.dts      |  0
>  arch/mips/boot/dts/{ => netlogic}/xlp_gvp.dts      |  0
>  arch/mips/boot/dts/{ => netlogic}/xlp_svp.dts      |  0
>  arch/mips/boot/dts/ralink/Makefile                 | 12 ++++++++
>  arch/mips/boot/dts/{ => ralink}/mt7620a.dtsi       |  0
>  arch/mips/boot/dts/{ => ralink}/mt7620a_eval.dts   |  0
>  arch/mips/boot/dts/{ => ralink}/rt2880.dtsi        |  0
>  arch/mips/boot/dts/{ => ralink}/rt2880_eval.dts    |  0
>  arch/mips/boot/dts/{ => ralink}/rt3050.dtsi        |  0
>  arch/mips/boot/dts/{ => ralink}/rt3052_eval.dts    |  0
>  arch/mips/boot/dts/{ => ralink}/rt3883.dtsi        |  0
>  arch/mips/boot/dts/{ => ralink}/rt3883_eval.dts    |  0
>  27 files changed, 73 insertions(+), 22 deletions(-)
>  create mode 100644 arch/mips/boot/dts/bcm/Makefile
>  rename arch/mips/boot/dts/{ => bcm}/bcm3384.dtsi (100%)
>  rename arch/mips/boot/dts/{ => bcm}/bcm93384wvg.dts (100%)
>  create mode 100644 arch/mips/boot/dts/cavium-octeon/Makefile
>  rename arch/mips/boot/dts/{ => cavium-octeon}/octeon_3xxx.dts (100%)
>  rename arch/mips/boot/dts/{ => cavium-octeon}/octeon_68xx.dts (100%)
>  create mode 100644 arch/mips/boot/dts/lantiq/Makefile
>  rename arch/mips/boot/dts/{ => lantiq}/danube.dtsi (100%)
>  rename arch/mips/boot/dts/{ => lantiq}/easy50712.dts (100%)
>  create mode 100644 arch/mips/boot/dts/mti/Makefile
>  rename arch/mips/boot/dts/{ => mti}/sead3.dts (100%)
>  create mode 100644 arch/mips/boot/dts/netlogic/Makefile
>  rename arch/mips/boot/dts/{ => netlogic}/xlp_evp.dts (100%)
>  rename arch/mips/boot/dts/{ => netlogic}/xlp_fvp.dts (100%)
>  rename arch/mips/boot/dts/{ => netlogic}/xlp_gvp.dts (100%)
>  rename arch/mips/boot/dts/{ => netlogic}/xlp_svp.dts (100%)
>  create mode 100644 arch/mips/boot/dts/ralink/Makefile
>  rename arch/mips/boot/dts/{ => ralink}/mt7620a.dtsi (100%)
>  rename arch/mips/boot/dts/{ => ralink}/mt7620a_eval.dts (100%)
>  rename arch/mips/boot/dts/{ => ralink}/rt2880.dtsi (100%)
>  rename arch/mips/boot/dts/{ => ralink}/rt2880_eval.dts (100%)
>  rename arch/mips/boot/dts/{ => ralink}/rt3050.dtsi (100%)
>  rename arch/mips/boot/dts/{ => ralink}/rt3052_eval.dts (100%)
>  rename arch/mips/boot/dts/{ => ralink}/rt3883.dtsi (100%)
>  rename arch/mips/boot/dts/{ => ralink}/rt3883_eval.dts (100%)
>
> diff --git a/arch/mips/Makefile b/arch/mips/Makefile
> index 37fce70..9c4b9c8 100644
> --- a/arch/mips/Makefile
> +++ b/arch/mips/Makefile
> @@ -354,7 +354,7 @@ core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
>
>  PHONY += dtbs
>  dtbs: scripts
> -       $(Q)$(MAKE) $(build)=arch/mips/boot/dts dtbs
> +       $(Q)$(MAKE) $(build)=arch/mips/boot/dts
>
>  archprepare:
>  ifdef CONFIG_MIPS32_N32
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index 4f49fa4..90d1fbc 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -1,21 +1,12 @@
> -dtb-$(CONFIG_BCM3384)                  += bcm93384wvg.dtb
> -dtb-$(CONFIG_CAVIUM_OCTEON_SOC)                += octeon_3xxx.dtb octeon_68xx.dtb
> -dtb-$(CONFIG_DT_EASY50712)             += easy50712.dtb
> -dtb-$(CONFIG_DT_XLP_EVP)               += xlp_evp.dtb
> -dtb-$(CONFIG_DT_XLP_SVP)               += xlp_svp.dtb
> -dtb-$(CONFIG_DT_XLP_FVP)               += xlp_fvp.dtb
> -dtb-$(CONFIG_DT_XLP_GVP)               += xlp_gvp.dtb
> -dtb-$(CONFIG_DTB_RT2880_EVAL)          += rt2880_eval.dtb
> -dtb-$(CONFIG_DTB_RT305X_EVAL)          += rt3052_eval.dtb
> -dtb-$(CONFIG_DTB_RT3883_EVAL)          += rt3883_eval.dtb
> -dtb-$(CONFIG_DTB_MT7620A_EVAL)         += mt7620a_eval.dtb
> -dtb-$(CONFIG_MIPS_SEAD3)               += sead3.dtb
> -
> -obj-y          += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> -
> -targets                += dtbs
> -targets                += $(dtb-y)
> -
> -dtbs: $(addprefix $(obj)/, $(dtb-y))
> -
> -clean-files    += *.dtb *.dtb.S
> +dts-dirs       += bcm
> +dts-dirs       += cavium-octeon
> +dts-dirs       += lantiq
> +dts-dirs       += mti
> +dts-dirs       += netlogic
> +dts-dirs       += ralink
> +
> +obj-y          := $(addsuffix /, $(dts-dirs))
> +
> +always         := $(dtb-y)
> +subdir-y       := $(dts-dirs)
> +clean-files    := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/bcm/Makefile b/arch/mips/boot/dts/bcm/Makefile
> new file mode 100644
> index 0000000..a353d4e
> --- /dev/null
> +++ b/arch/mips/boot/dts/bcm/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_BCM3384)          += bcm93384wvg.dtb
> +
> +obj-y                          += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj-                           += dummy.o
> +
> +always                         := $(dtb-y)
> +clean-files                    := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/bcm3384.dtsi b/arch/mips/boot/dts/bcm/bcm3384.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/bcm3384.dtsi
> rename to arch/mips/boot/dts/bcm/bcm3384.dtsi
> diff --git a/arch/mips/boot/dts/bcm93384wvg.dts b/arch/mips/boot/dts/bcm/bcm93384wvg.dts
> similarity index 100%
> rename from arch/mips/boot/dts/bcm93384wvg.dts
> rename to arch/mips/boot/dts/bcm/bcm93384wvg.dts
> diff --git a/arch/mips/boot/dts/cavium-octeon/Makefile b/arch/mips/boot/dts/cavium-octeon/Makefile
> new file mode 100644
> index 0000000..5b99c40
> --- /dev/null
> +++ b/arch/mips/boot/dts/cavium-octeon/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_CAVIUM_OCTEON_SOC)        += octeon_3xxx.dtb octeon_68xx.dtb
> +
> +obj-y                          += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj-                           += dummy.o
> +
> +always                         := $(dtb-y)
> +clean-files                    := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
> similarity index 100%
> rename from arch/mips/boot/dts/octeon_3xxx.dts
> rename to arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
> diff --git a/arch/mips/boot/dts/octeon_68xx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
> similarity index 100%
> rename from arch/mips/boot/dts/octeon_68xx.dts
> rename to arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
> diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile
> new file mode 100644
> index 0000000..0906c62
> --- /dev/null
> +++ b/arch/mips/boot/dts/lantiq/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_DT_EASY50712)     += easy50712.dtb
> +
> +obj-y                          += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj-                           += dummy.o
> +
> +always                         := $(dtb-y)
> +clean-files                    := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/danube.dtsi
> rename to arch/mips/boot/dts/lantiq/danube.dtsi
> diff --git a/arch/mips/boot/dts/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
> similarity index 100%
> rename from arch/mips/boot/dts/easy50712.dts
> rename to arch/mips/boot/dts/lantiq/easy50712.dts
> diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
> new file mode 100644
> index 0000000..ef1f3db
> --- /dev/null
> +++ b/arch/mips/boot/dts/mti/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_MIPS_SEAD3)       += sead3.dtb
> +
> +obj-y                          += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj-                           += dummy.o
> +
> +always                         := $(dtb-y)
> +clean-files                    := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
> similarity index 100%
> rename from arch/mips/boot/dts/sead3.dts
> rename to arch/mips/boot/dts/mti/sead3.dts
> diff --git a/arch/mips/boot/dts/netlogic/Makefile b/arch/mips/boot/dts/netlogic/Makefile
> new file mode 100644
> index 0000000..e126cd3
> --- /dev/null
> +++ b/arch/mips/boot/dts/netlogic/Makefile
> @@ -0,0 +1,12 @@
> +dtb-$(CONFIG_DT_XLP_EVP)       += xlp_evp.dtb
> +dtb-$(CONFIG_DT_XLP_SVP)       += xlp_svp.dtb
> +dtb-$(CONFIG_DT_XLP_FVP)       += xlp_fvp.dtb
> +dtb-$(CONFIG_DT_XLP_GVP)       += xlp_gvp.dtb
> +
> +obj-y                          += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj-                           += dummy.o
> +
> +always                         := $(dtb-y)
> +clean-files                    := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/xlp_evp.dts b/arch/mips/boot/dts/netlogic/xlp_evp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_evp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_evp.dts
> diff --git a/arch/mips/boot/dts/xlp_fvp.dts b/arch/mips/boot/dts/netlogic/xlp_fvp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_fvp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_fvp.dts
> diff --git a/arch/mips/boot/dts/xlp_gvp.dts b/arch/mips/boot/dts/netlogic/xlp_gvp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_gvp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_gvp.dts
> diff --git a/arch/mips/boot/dts/xlp_svp.dts b/arch/mips/boot/dts/netlogic/xlp_svp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_svp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_svp.dts
> diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
> new file mode 100644
> index 0000000..2a72259
> --- /dev/null
> +++ b/arch/mips/boot/dts/ralink/Makefile
> @@ -0,0 +1,12 @@
> +dtb-$(CONFIG_DTB_RT2880_EVAL)  += rt2880_eval.dtb
> +dtb-$(CONFIG_DTB_RT305X_EVAL)  += rt3052_eval.dtb
> +dtb-$(CONFIG_DTB_RT3883_EVAL)  += rt3883_eval.dtb
> +dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb
> +
> +obj-y                          += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj-                           += dummy.o
> +
> +always                         := $(dtb-y)
> +clean-files                    := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/mt7620a.dtsi
> rename to arch/mips/boot/dts/ralink/mt7620a.dtsi
> diff --git a/arch/mips/boot/dts/mt7620a_eval.dts b/arch/mips/boot/dts/ralink/mt7620a_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/mt7620a_eval.dts
> rename to arch/mips/boot/dts/ralink/mt7620a_eval.dts
> diff --git a/arch/mips/boot/dts/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/rt2880.dtsi
> rename to arch/mips/boot/dts/ralink/rt2880.dtsi
> diff --git a/arch/mips/boot/dts/rt2880_eval.dts b/arch/mips/boot/dts/ralink/rt2880_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/rt2880_eval.dts
> rename to arch/mips/boot/dts/ralink/rt2880_eval.dts
> diff --git a/arch/mips/boot/dts/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/rt3050.dtsi
> rename to arch/mips/boot/dts/ralink/rt3050.dtsi
> diff --git a/arch/mips/boot/dts/rt3052_eval.dts b/arch/mips/boot/dts/ralink/rt3052_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/rt3052_eval.dts
> rename to arch/mips/boot/dts/ralink/rt3052_eval.dts
> diff --git a/arch/mips/boot/dts/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/rt3883.dtsi
> rename to arch/mips/boot/dts/ralink/rt3883.dtsi
> diff --git a/arch/mips/boot/dts/rt3883_eval.dts b/arch/mips/boot/dts/ralink/rt3883_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/rt3883_eval.dts
> rename to arch/mips/boot/dts/ralink/rt3883_eval.dts
> --
> 2.2.0.rc0.207.ga3a616c
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux