From: Andrew Jackson <Andrew.Jackson@xxxxxxx>
Add documentation for Designware I2S hardware block. The block requires
one clock (for audio sampling) and DMA channels for receive and transmit.
Signed-off-by: Andrew Jackson <Andrew.Jackson@xxxxxxx>
---
.../devicetree/bindings/sound/designware-i2s.txt | 31 ++++++++++++++++++++
1 files changed, 31 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt
diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
new file mode 100644
index 0000000..7bb5424
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/designware-i2s.txt
@@ -0,0 +1,31 @@
+DesignWare I2S controller
+
+Required properties:
+ - compatible : Must be "snps,designware-i2s"
+ - reg : Must contain the I2S core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's
+ clocks. The controller expects one clock: the clock used as the sampling
+ rate reference clock sample.
+ - clock-names : "i2sclk" for the sample rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channels that are used by
+ the core. The core expects one or two dma channels: one for transmit and
+ one for receive.
+ - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
+properties please check:
+ * resource-names.txt
+ * clock/clock-bindings.txt
+ * dma/dma.txt
+
+Example:
+
+ soc_i2s: i2s@7ff90000 {
+ compatible = "snps,designware-i2s";
+ reg = <0x0 0x7ff90000 0x0 0x1000>;
+ clocks = <&scpi_i2sclk 0>;
+ clock-names = "i2sclk";
+ #sound-dai-cells = <0>;
+ dmas = <&dma0 5>;
+ dma-names = "tx";
+ };
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
