Re: [PATCH V2 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/25/2023 5:14 PM, Dmitry Baryshkov wrote:
On Fri, 25 Aug 2023 at 12:15, Devi Priya <quic_devipriy@xxxxxxxxxxx> wrote:

Add Networking Sub System Clock Controller(NSSCC) driver for ipq9574 based
devices.

Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
---
  Changes in V2:
         - Added depends on ARM64 || COMPILE_TEST in Kconfig
         - Added module_platform_driver
         - Dropped patch [2/6] - clk: qcom: gcc-ipq9574: Mark nssnoc clocks as critical
            & added pm_clk for nssnoc clocks
         - Updated the uniphy clock names

  drivers/clk/qcom/Kconfig         |    7 +
  drivers/clk/qcom/Makefile        |    1 +
  drivers/clk/qcom/nsscc-ipq9574.c | 3109 ++++++++++++++++++++++++++++++
  3 files changed, 3117 insertions(+)
  create mode 100644 drivers/clk/qcom/nsscc-ipq9574.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index bd9bfb11b328..3ecc11e2c8e3 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -203,6 +203,13 @@ config IPQ_GCC_9574
           i2c, USB, SD/eMMC, etc. Select this for the root clock
           of ipq9574.

+config IPQ_NSSCC_9574
+       tristate "IPQ9574 NSS Clock Controller"
+       depends on ARM64 || COMPILE_TEST
+       depends on IPQ_GCC_9574
+       help
+         Support for NSS clock controller on ipq9574 devices.
+
  config MSM_GCC_8660
         tristate "MSM8660 Global Clock Controller"
         depends on ARM || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 4790c8cca426..3f084928962e 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
  obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
  obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
  obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o
+obj-$(CONFIG_IPQ_NSSCC_9574)   += nsscc-ipq9574.o
  obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
  obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o
  obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
diff --git a/drivers/clk/qcom/nsscc-ipq9574.c b/drivers/clk/qcom/nsscc-ipq9574.c
new file mode 100644
index 000000000000..65bdb449ae5f
--- /dev/null
+++ b/drivers/clk/qcom/nsscc-ipq9574.c
@@ -0,0 +1,3109 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+
+#include <dt-bindings/clock/qcom,ipq9574-nsscc.h>
+#include <dt-bindings/reset/qcom,ipq9574-nsscc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "common.h"
+#include "reset.h"
+
+/* Need to match the order of clocks in DT binding */
+enum {
+       DT_NSSNOC_NSSCC_CLK,
+       DT_NSSNOC_SNOC_CLK,
+       DT_NSSNOC_SNOC_1_CLK,

Not using the index makes it seem that these clocks are not used,
until one scrolls down to pm_clks.
Okay, got it

BTW: The NSSNOC_SNOC clocks make it look like there is an interconnect
here (not a simple NIU).

Hi Dmitry, We are exploring on the ICC driver. In the meantime to unblock PCIe/NSS changes getting merged, shall we use regmap_update_bits and turn on the critical NSSNOC clocks, ANOC & SNOC pcie clocks in the probe function of the gcc driver itself as like sm8550 driver to get the changes merged?

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clk/qcom/gcc-sm8550.c#n3347

+       DT_BIAS_PLL_CC_CLK,
+       DT_BIAS_PLL_NSS_NOC_CLK,
+       DT_BIAS_PLL_UBI_NC_CLK,
+       DT_GCC_GPLL0_OUT_AUX,
+       DT_UNIPHY0_NSS_RX_CLK,
+       DT_UNIPHY0_NSS_TX_CLK,
+       DT_UNIPHY1_NSS_RX_CLK,
+       DT_UNIPHY1_NSS_TX_CLK,
+       DT_UNIPHY2_NSS_RX_CLK,
+       DT_UNIPHY2_NSS_TX_CLK,
+       DT_XO,

As I wrote, please move DT_XO closer to the beginning of the list.

+};
+
+enum {
+       P_BIAS_PLL_CC_CLK,
+       P_BIAS_PLL_NSS_NOC_CLK,
+       P_BIAS_PLL_UBI_NC_CLK,
+       P_GCC_GPLL0_OUT_AUX,
+       P_UBI32_PLL_OUT_MAIN,
+       P_UNIPHY0_NSS_RX_CLK,
+       P_UNIPHY0_NSS_TX_CLK,
+       P_UNIPHY1_NSS_RX_CLK,
+       P_UNIPHY1_NSS_TX_CLK,
+       P_UNIPHY2_NSS_RX_CLK,
+       P_UNIPHY2_NSS_TX_CLK,
+       P_XO,
+};
+
+static const struct alpha_pll_config ubi32_pll_config = {
+       .l = 0x3e,
+       .alpha = 0x6666,
+       .config_ctl_val = 0x200d4aa8,
+       .config_ctl_hi_val = 0x3c,
+       .main_output_mask = BIT(0),
+       .aux_output_mask = BIT(1),
+       .pre_div_val = 0x0,
+       .pre_div_mask = BIT(12),
+       .post_div_val = 0x0,
+       .post_div_mask = GENMASK(9, 8),
+       .alpha_en_mask = BIT(24),
+       .test_ctl_val = 0x1c0000c0,
+       .test_ctl_hi_val = 0x4000,
+};
+
+static struct clk_alpha_pll ubi32_pll_main = {
+       .offset = 0x28000,
+       .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
+       .flags = SUPPORTS_DYNAMIC_UPDATE,
+       .clkr = {
+               .hw.init = &(const struct clk_init_data) {
+                       .name = "ubi32_pll_main",
+                       .parent_data = &(const struct clk_parent_data) {
+                               .index = DT_XO,
+                       },
+                       .num_parents = 1,
+                       .ops = &clk_alpha_pll_huayra_ops,
+               },
+       },
+};
+
+static struct clk_alpha_pll_postdiv ubi32_pll = {
+       .offset = 0x28000,
+       .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
+       .width = 2,
+       .clkr.hw.init = &(const struct clk_init_data) {
+               .name = "ubi32_pll",
+               .parent_hws = (const struct clk_hw *[]) {
+                       &ubi32_pll_main.clkr.hw
+               },
+               .num_parents = 1,
+               .ops = &clk_alpha_pll_postdiv_ro_ops,
+               .flags = CLK_SET_RATE_PARENT,
+       },
+};
+

[skipped clock tables, LGTM]

+static const struct of_device_id nss_cc_ipq9574_match_table[] = {
+       { .compatible = "qcom,ipq9574-nsscc" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, nss_cc_ipq9574_match_table);
+
+static int nss_cc_ipq9574_probe(struct platform_device *pdev)
+{
+       struct regmap *regmap;
+       struct qcom_cc_desc nsscc_ipq9574_desc = nss_cc_ipq9574_desc;
+
+       int ret;
+
+       ret = devm_pm_runtime_enable(&pdev->dev);
+       if (ret < 0)
+               return ret;
+
+       ret = devm_pm_clk_create(&pdev->dev);
+       if (ret < 0)
+               return ret;
+
+       ret = of_pm_clk_add_clk(&pdev->dev, "nssnoc_nsscc");

As we are switching to DT indices, better add new API that takes index
rather than mixing indices and names.
sure okay

Thanks,
Devi Priya

+       if (ret < 0) {
+               dev_err(&pdev->dev, "Failed to acquire nssnoc_nsscc clock\n");
+               return ret;
+       }
+
+       ret = of_pm_clk_add_clk(&pdev->dev, "nssnoc_snoc");
+       if (ret < 0) {
+               dev_err(&pdev->dev, "Failed to acquire nssnoc_snoc clock\n");
+               return ret;
+       }
+
+       ret = of_pm_clk_add_clk(&pdev->dev, "nssnoc_snoc_1");
+       if (ret < 0) {
+               dev_err(&pdev->dev, "Failed to acquire nssnoc_snoc_1 clock\n");
+               return ret;
+       }
+
+       ret = pm_runtime_get(&pdev->dev);
+       if (ret)
+               return ret;
+
+       regmap = qcom_cc_map(pdev, &nsscc_ipq9574_desc);
+       if (IS_ERR(regmap))
+               return PTR_ERR(regmap);
+
+       clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config);
+
+       return qcom_cc_really_probe(pdev, &nsscc_ipq9574_desc, regmap);
+}
+
+static const struct dev_pm_ops nss_cc_pm_ops = {
+       SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static struct platform_driver nss_cc_ipq9574_driver = {
+       .probe = nss_cc_ipq9574_probe,
+       .driver = {
+               .name = "qcom,nsscc-ipq9574",
+               .of_match_table = nss_cc_ipq9574_match_table,
+               .pm = &nss_cc_pm_ops,
+       },
+};
+
+module_platform_driver(nss_cc_ipq9574_driver);
+
+MODULE_DESCRIPTION("QTI NSS_CC IPQ9574 Driver");
+MODULE_LICENSE("GPL");
--
2.34.1






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux