Re: [PATCH v5 2/2] gpio: loongson: add more gpio chip support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





在 2023/9/12 下午5:02, Bartosz Golaszewski 写道:
On Tue, Aug 29, 2023 at 2:35 PM Yinbo Zhu <zhuyinbo@xxxxxxxxxxx> wrote:

This patch was to add loongson 2k0500, 2k2000 and 3a5000 gpio chip
driver support.

Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
---
  drivers/gpio/gpio-loongson-64bit.c | 125 ++++++++++++++++++++++++++---
  1 file changed, 113 insertions(+), 12 deletions(-)

diff --git a/drivers/gpio/gpio-loongson-64bit.c b/drivers/gpio/gpio-loongson-64bit.c
index 06213bbfabdd..2608f7eeba3b 100644
--- a/drivers/gpio/gpio-loongson-64bit.c
+++ b/drivers/gpio/gpio-loongson-64bit.c
@@ -23,9 +23,10 @@ enum loongson_gpio_mode {
  struct loongson_gpio_chip_data {
         const char              *label;
         enum loongson_gpio_mode mode;
-       unsigned int            conf_offset;
-       unsigned int            out_offset;
-       unsigned int            in_offset;
+       u32                     conf_offset;
+       u32                     out_offset;
+       u32                     in_offset;
+       u32                     inten_offset;

Why are you doing this? If this change is needed, it warrants at least
a mention in the commit message.


Hi Bart,

These changes include add "inten_offset" and use use "u32" replaced
"unsigned int", which type change was due to v3 has following code,

but, in v5 gpio patch, no following code, so no need type change.

104 + if (device_property_read_u32(dev, "loongson,gpio-conf-offset", (u32 *)&d->conf_offset) 105 + || device_property_read_u32(dev, "loongson,gpio-in-offset", (u32 *)&d->in_offset) 106 + || device_property_read_u32(dev, "loongson,gpio-out-offset", (u32 *)&d->out_offset) 107 + || device_property_read_u32(dev, "loongson,gpio-ctrl-mode", (u32 *)&d->mode))


I will add following change in v6.

--- a/drivers/gpio/gpio-loongson-64bit.c
+++ b/drivers/gpio/gpio-loongson-64bit.c
@@ -26,6 +26,7 @@ struct loongson_gpio_chip_data {
        unsigned int            conf_offset;
        unsigned int            out_offset;
        unsigned int            in_offset;
+       unsigned int            inten_offset;
 };


Change the commit log to the following:

This patch was to add loongson 2k0500, 2k2000 and 3a5000 gpio chip
driver support and define inten_offset attribute to enable gpio chip
interrupt.

Thanks,
Yinbo


  };

  struct loongson_gpio_chip {
@@ -117,19 +118,29 @@ static void loongson_gpio_set(struct gpio_chip *chip, unsigned int pin, int valu

  static int loongson_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
  {
+       unsigned int u;
         struct platform_device *pdev = to_platform_device(chip->parent);
+       struct loongson_gpio_chip *lgpio = to_loongson_gpio_chip(chip);
+
+       if (lgpio->chip_data->mode == BIT_CTRL_MODE) {
+               /* Get the register index from offset then multiply by bytes per register */
+               u = readl(lgpio->reg_base + lgpio->chip_data->inten_offset + (offset / 32) * 4);
+               u |= BIT(offset % 32);
+               writel(u, lgpio->reg_base + lgpio->chip_data->inten_offset + (offset / 32) * 4);
+       } else {
+               writeb(1, lgpio->reg_base + lgpio->chip_data->inten_offset + offset);
+       }

         return platform_get_irq(pdev, offset);
  }

  static int loongson_gpio_init(struct device *dev, struct loongson_gpio_chip *lgpio,
-                             struct device_node *np, void __iomem *reg_base)
+                             void __iomem *reg_base)
  {
         int ret;
         u32 ngpios;

         lgpio->reg_base = reg_base;
-
         if (lgpio->chip_data->mode == BIT_CTRL_MODE) {
                 ret = bgpio_init(&lgpio->chip, dev, 8,
                                 lgpio->reg_base + lgpio->chip_data->in_offset,
@@ -148,15 +159,15 @@ static int loongson_gpio_init(struct device *dev, struct loongson_gpio_chip *lgp
                 lgpio->chip.direction_output = loongson_gpio_direction_output;
                 lgpio->chip.set = loongson_gpio_set;
                 lgpio->chip.parent = dev;
+               device_property_read_u32(dev, "ngpios", &ngpios);
+               lgpio->chip.ngpio = ngpios;
                 spin_lock_init(&lgpio->lock);
         }

-       device_property_read_u32(dev, "ngpios", &ngpios);
-
-       lgpio->chip.can_sleep = 0;
-       lgpio->chip.ngpio = ngpios;
         lgpio->chip.label = lgpio->chip_data->label;
-       lgpio->chip.to_irq = loongson_gpio_to_irq;
+       lgpio->chip.can_sleep = false;
+       if (lgpio->chip_data->inten_offset)
+               lgpio->chip.to_irq = loongson_gpio_to_irq;

         return devm_gpiochip_add_data(dev, &lgpio->chip, lgpio);
  }
@@ -165,7 +176,6 @@ static int loongson_gpio_probe(struct platform_device *pdev)
  {
         void __iomem *reg_base;
         struct loongson_gpio_chip *lgpio;
-       struct device_node *np = pdev->dev.of_node;
         struct device *dev = &pdev->dev;

         lgpio = devm_kzalloc(dev, sizeof(*lgpio), GFP_KERNEL);
@@ -178,7 +188,7 @@ static int loongson_gpio_probe(struct platform_device *pdev)
         if (IS_ERR(reg_base))
                 return PTR_ERR(reg_base);

-       return loongson_gpio_init(dev, lgpio, np, reg_base);
+       return loongson_gpio_init(dev, lgpio, reg_base);
  }

  static const struct loongson_gpio_chip_data loongson_gpio_ls2k_data = {
@@ -187,6 +197,57 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls2k_data = {
         .conf_offset = 0x0,
         .in_offset = 0x20,
         .out_offset = 0x10,
+       .inten_offset = 0x30,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k0500_data0 = {
+       .label = "ls2k0500_gpio",
+       .mode = BIT_CTRL_MODE,
+       .conf_offset = 0x0,
+       .in_offset = 0x8,
+       .out_offset = 0x10,
+       .inten_offset = 0xb0,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k0500_data1 = {
+       .label = "ls2k0500_gpio",
+       .mode = BIT_CTRL_MODE,
+       .conf_offset = 0x0,
+       .in_offset = 0x8,
+       .out_offset = 0x10,
+       .inten_offset = 0x98,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data0 = {
+       .label = "ls2k2000_gpio",
+       .mode = BIT_CTRL_MODE,
+       .conf_offset = 0x0,
+       .in_offset = 0xc,
+       .out_offset = 0x8,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data1 = {
+       .label = "ls2k2000_gpio",
+       .mode = BIT_CTRL_MODE,
+       .conf_offset = 0x0,
+       .in_offset = 0x20,
+       .out_offset = 0x10,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data2 = {
+       .label = "ls2k2000_gpio",
+       .mode = BIT_CTRL_MODE,
+       .conf_offset = 0x84,
+       .in_offset = 0x88,
+       .out_offset = 0x80,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls3a5000_data = {
+       .label = "ls3a5000_gpio",
+       .mode = BIT_CTRL_MODE,
+       .conf_offset = 0x0,
+       .in_offset = 0xc,
+       .out_offset = 0x8,
  };

  static const struct loongson_gpio_chip_data loongson_gpio_ls7a_data = {
@@ -202,6 +263,30 @@ static const struct of_device_id loongson_gpio_of_match[] = {
                 .compatible = "loongson,ls2k-gpio",
                 .data = &loongson_gpio_ls2k_data,
         },
+       {
+               .compatible = "loongson,ls2k0500-gpio0",
+               .data = &loongson_gpio_ls2k0500_data0,
+       },
+       {
+               .compatible = "loongson,ls2k0500-gpio1",
+               .data = &loongson_gpio_ls2k0500_data1,
+       },
+       {
+               .compatible = "loongson,ls2k2000-gpio0",
+               .data = &loongson_gpio_ls2k2000_data0,
+       },
+       {
+               .compatible = "loongson,ls2k2000-gpio1",
+               .data = &loongson_gpio_ls2k2000_data1,
+       },
+       {
+               .compatible = "loongson,ls2k2000-gpio2",
+               .data = &loongson_gpio_ls2k2000_data2,
+       },
+       {
+               .compatible = "loongson,ls3a5000-gpio",
+               .data = &loongson_gpio_ls3a5000_data,
+       },
         {
                 .compatible = "loongson,ls7a-gpio",
                 .data = &loongson_gpio_ls7a_data,
@@ -215,6 +300,22 @@ static const struct acpi_device_id loongson_gpio_acpi_match[] = {
                 .id = "LOON0002",
                 .driver_data = (kernel_ulong_t)&loongson_gpio_ls7a_data,
         },
+       {
+               .id = "LOON0007",
+               .driver_data = (kernel_ulong_t)&loongson_gpio_ls3a5000_data,
+       },
+       {
+               .id = "LOON000A",
+               .driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data0,
+       },
+       {
+               .id = "LOON000B",
+               .driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data1,
+       },
+       {
+               .id = "LOON000C",
+               .driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data2,
+       },
         {}
  };
  MODULE_DEVICE_TABLE(acpi, loongson_gpio_acpi_match);
--
2.20.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux