Re: [PATCH] PCIe: Designware: Do not allow config space through ranges

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On Monday 22 December 2014 02:00 PM, Arnd Bergmann wrote:
On Monday 22 December 2014 12:09:04 Pratyush Anand wrote:
Config space is need to be allocated using reg property. This patch
removes possibility of config space allocation through ranges property.

To: Mohit Kumar <mohit.kumar@xxxxxx>
To: Jingo Han <jg1.han@xxxxxxxxxxx>
To: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
To: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
Cc: linux-pci@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Pratyush Anand <panand@xxxxxxxxxx>
---
  arch/arm/boot/dts/imx6qdl.dtsi     |  3 +--
  arch/arm/boot/dts/imx6sx.dtsi      |  8 ++++----

changing the DT files is probably ok.

diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index df781cdf13c1..0b22b42e1ff9 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -409,19 +409,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
  			pp->mem_mod_base = of_read_number(parser.range -
  							  parser.np + na, ns);
  		}
-		if (restype == 0) {
-			of_pci_range_to_resource(&range, np, &pp->cfg);
-			pp->cfg0_size = resource_size(&pp->cfg)/2;
-			pp->cfg1_size = resource_size(&pp->cfg)/2;
-			pp->cfg0_base = pp->cfg.start;
-			pp->cfg1_base = pp->cfg.start + pp->cfg0_size;
-
-			/* Find the untranslated configuration space address */
-			pp->cfg0_mod_base = of_read_number(parser.range -
-							   parser.np + na, ns);
-			pp->cfg1_mod_base = pp->cfg0_mod_base +
-					    pp->cfg0_size;
-		}
  	}

Since we've allowed this for so long, it may be better to leave this
in for compatibility with old dts files. It would however be good to
print a warning message. We could also limit it to those machines that
are known to have been used with this property in the past.

I think, only imx6 is using "config from ranges", for which I made the change in this patch. Modification need to be tested and acked by IMX6 maintainers. I do not see any other driver using it. However, I have kept all designware user in CC here.

~Pratyush



	Arnd

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux