Re: [PATCH v2 00/15] arm64: dts: meson: a1: introduce several peripheral IPs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/08/2023 23:36, Dmitry Rokosov wrote:
This patch series introduces device tree declarations for various
peripheral IPs of the A1 SoC family, including clock controllers, EFUSE,
USB, SPI Flash Controller, SDIO, and UART_AO:
     - CLK: A1 SoC has four types on the board, namely PLL, Peripherals,
       CPU, and Audio, but only Amlogic A1 PLL and Peripherals clock
       controllers are currently supported.
     - EFUSE: consists of a 4k bit One Time Programmable (OTP) memory
       divided into 32 128-bit blocks, and data is accessed using the APB
       bus through software or the Key-ladder integrated with the EFUSE
       block.
     - USB: only one USB 2.0 high-speed port is available in the A1 SoC,
       supporting both HOST and DEVICE modes for OTG.
     - SPI Flash Controller: 4-bit QPI/SPI NOR Flash or NAND FLASH
       controller.
     - SDIO: for WiFi/IEEE802.11 connection.
     - UART_AO: for Bluetooth connection.
     - HWRNG: hardware random generator integrated into SoC.
     - AO SECURE: board info registers.

The above peripherals are integrated to new AD402 board device tree.

Changes v2 since v1 at [1]:
     - reorder meson-a1 dtsi includes to keep them sorted
     - remove extra empty lines
     - purge the unnecessary 'okay' status
     - reorder all device tree nodes (existing and new) sorted by 'reg'
       values
     - introduce new saradc definition
     - add hwrng dts node
     - provide ao secure dts node with board info registers
     - include all changes to new AD402 board device tree
     - add AD402 board to bindings

Links:
     [1] https://lore.kernel.org/all/20230607201641.20982-1-ddrokosov@xxxxxxxxxxxxxx/

Alexey Romanov (3):
   arm64: dts: meson: a1: enable efuse controller and setup its clk
   arm64: dts: meson: a1: add hw rng node
   arm64: dts: meson: a1: add ao secure node

Dmitry Rokosov (8):
   arm64: dts: meson: a1: reorder includes to keep them sorted
   arm64: dts: meson: a1: remove extra empty line before reset node
   arm64: dts: meson: a1: remove the unnecessary 'okay' status pwrc value
   arm64: dts: meson: a1: reorder gpio_intc node definition
   arm64: dts: meson: a1: introduce PLL and Peripherals clk controllers
   arm64: dts: meson: a1: support USB controller in OTG mode
   arm64: dts: introduce Amlogic AD402 reference board based on A113L SoC
   dt-bindings: arm: amlogic: add Amlogic AD402 bindings

George Stark (1):
   arm64: dts: meson: a1: add saradc definition

Jan Dakinevich (1):
   arm64: dts: meson: a1: add eMMC controller and its pins

Martin Kurbanov (1):
   arm64: dts: meson: a1: introduce SPI Flash Controller

Oleg Lyovin (1):
   arm64: dts: meson: a1: introduce UART_AO mux definitions

  .../devicetree/bindings/arm/amlogic.yaml      |   1 +
  arch/arm64/boot/dts/amlogic/Makefile          |   1 +
  .../arm64/boot/dts/amlogic/meson-a1-ad402.dts | 145 ++++++++++++
  arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 213 +++++++++++++++++-
  4 files changed, 348 insertions(+), 12 deletions(-)
  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts


For the whole serie:

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Thanks !

Neil



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux