On 07/09/2023 03:01, Adam Ford wrote: > The pinmux for LED3 and LED4 are incorrectly attached to the > omap3_pmx_core when they should be connected to the omap3_pmx_wkup > pin mux. This was likely masked by the fact that the bootloader > used to do all the pinmuxing. > > Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton") > Signed-off-by: Adam Ford <aford173@xxxxxxxxx> > --- > This likely cannot apply to the original series, because the file has > moved. I can generate a separate patch for the pre-move device trees > if necesssary. The original location was: > arch/arm/boot/dts/am3517-evm.dts > > diff --git a/arch/arm/boot/dts/ti/omap/am3517-evm.dts b/arch/arm/boot/dts/ti/omap/am3517-evm.dts > index af9df15274be..738189ddc8d5 100644 > --- a/arch/arm/boot/dts/ti/omap/am3517-evm.dts > +++ b/arch/arm/boot/dts/ti/omap/am3517-evm.dts > @@ -271,13 +271,6 @@ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ > >; > }; > > - leds_pins: leds-pins { > - pinctrl-single,pins = < > - OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */ > - OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */ > - >; > - }; > - > mmc1_pins: mmc1-pins { > pinctrl-single,pins = < > OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ > @@ -355,3 +348,12 @@ OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ > >; > }; > }; > + > +&omap3_pmx_wkup { > + leds_pins: pinmux_leds_pins { Come on... why moving it and changing the name to incorrect one? Isn't a move cut-paste? Best regards, Krzysztof