Re: [PATCH v5 2/5] arm64: dts: qcom: sm8450: Add opp table support to PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7.09.2023 11:56, Krishna Chaitanya Chundru wrote:
> 
> On 9/7/2023 2:34 PM, Konrad Dybcio wrote:
>> On 7.09.2023 08:00, Krishna chaitanya chundru wrote:
>>> PCIe needs to choose the appropriate performance state of RPMH power
>>> domain based up on the PCIe gen speed.
>>>
>>> So let's add the OPP table support to specify RPMH performance states.
>>>
>>> Use opp-level for the PCIe gen speed for easier use.
>>>
>>> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
>>> ---
>> [...]
>>
>>> +
>>> +            pcie1_opp_table: opp-table {
>>> +                compatible = "operating-points-v2";
>>> +
>>> +                opp-1 {
>>> +                    opp-level = <1>;
>>> +                    required-opps = <&rpmhpd_opp_low_svs>;
>>> +                };
>>> +
>>> +                opp-2 {
>>> +                    opp-level = <2>;
>>> +                    required-opps = <&rpmhpd_opp_low_svs>;
>>> +                };
>>> +
>>> +                opp-3 {
>>> +                    opp-level = <3>;
>>> +                    required-opps = <&rpmhpd_opp_low_svs>;
>> Is gen3 not supposed to require nom like on pcie0?
> This particular controller instance can operate at low svs for GEN3.
>> Also, can all non-maximum OPPs run at just low_svs?
> This depends on the hardware capability, for this instance expect GEN4 remaining can operate in LOW svs. It varies from controller instance to instance and also from target to target.
Ok, thanks for confirming

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux