Re: Debugging i2c : i2cdetect cant detect a device on i2c line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[also Cc: devicetree and ARM folks]

On Thu, Sep 07, 2023 at 08:21:44AM +0530, Raul Piper wrote:
> Hello ,
> I am trying to detect an i2c device A on i2c1 line on  one of the Arm
> Cortex A7 platform but not able to see any device on a given address (
> 0x3d) .
> 
> Is there any parameters of i2c which i can change like rise/fall time
> , timeout etc in a device tree or kernel source and re test it?
> I have tried changing the i2c speed from 100KHz to 400 KHz  but no success.
> I have even tried removing the 1.5K pull ups on the i2c lines but no result.
> 
> So I wanted to know on what factors i2cdetect may not probe the device
> or show it on the hex dump.
> What parameters of i2c driver i can tinker and where? Is Platform dts
> is the only file i can modify and test with?
> Kernel is 5.51 .

Do you mean v5.15.y stable series?

> There are other 2-3 devices on the same lines which responds to
> i2cdetect with correct address but not this device (0x3D) .
> Its i2c address is also different from the current devices.
> 

Specifically, what device do you have this issue with?

Confused...

-- 
An old man doll... just what I always wanted! - Clara

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux