According to schematics the VCCQ2 supply is not connected and the L3G
regulator instead powers up the controller pads (VDD_PX10). Use correct
supply vdd-hba and drop unsupported current limit for the vdd-hba.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 2c09ce8aeafd..923b40646e81 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -889,8 +889,7 @@ &ufs_mem_hc {
vcc-max-microamp = <1300000>;
vccq-supply = <&vreg_l1g_1p2>;
vccq-max-microamp = <1200000>;
- vccq2-supply = <&vreg_l3g_1p2>;
- vccq2-max-microamp = <100>;
+ vdd-hba-supply = <&vreg_l3g_1p2>;
status = "okay";
};
--
2.34.1
