Enable the ADSP, MPSS and Wi-Fi. Tighten up the Wi-Fi regulators to
make them compliant with that the chip expects.
The Wi-Fi reports:
qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 0f7c59187896..5f7619518deb 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -134,6 +134,16 @@ &qupv3_id_0 {
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/qcm2290/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/qcm2290/modem.mbn";
+ status = "okay";
+};
+
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm2250-regulators";
@@ -373,6 +383,14 @@ &usb_hsphy {
status = "okay";
};
+&wifi {
+ vdd-0.8-cx-mx-supply = <&pm2250_l7>;
+ vdd-1.8-xo-supply = <&pm2250_l13>;
+ vdd-1.3-rfa-supply = <&pm2250_l10>;
+ vdd-3.3-ch0-supply = <&pm2250_l22>;
+ status = "okay";
+};
+
&xo_board {
clock-frequency = <38400000>;
};
--
2.42.0
