On 06/09/2023 01:31, Paul Elder wrote: > Add bindings for the THine THP7312 ISP. > > Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx> > --- > Since the THP7312 supports multiple sensors, thine,rx-data-lanes alone > might not be enough. I was consdering using sensor nodes like what the > AP1302 does [1]. This way we can also move the power supplies that only > concern the sensor in there as well. I was wondering what to do about > the model name, though, as the thp7312 completely isolates that from the > rest of the system. > > I'm planning to add sensor nodes in somehow in a v2. > > [1] https://lore.kernel.org/linux-media/20211006113254.3470-2-anil.mamidala@xxxxxxxxxx/ > > .../bindings/media/thine,thp7312.yaml | 170 ++++++++++++++++++ > 1 file changed, 170 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/thine,thp7312.yaml > > diff --git a/Documentation/devicetree/bindings/media/thine,thp7312.yaml b/Documentation/devicetree/bindings/media/thine,thp7312.yaml > new file mode 100644 > index 000000000000..e8d203dcda81 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/thine,thp7312.yaml > @@ -0,0 +1,170 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2023 Ideas on Board > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/thine,thp7312.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: THine THP7312 > + > +maintainers: > + - Paul Elder <paul.elder@@ideasonboard.com> > + > +description: > + The THP7312 is a standalone ISP controlled over i2c, and is capable of > + various image processing and correction functions, including 3A control. It > + can be connected to CMOS image sensors from various vendors, supporting both > + MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2 > + or parallel. The hardware is capable of transmitting and receiving MIPI > + interlaved data strams with data types or multiple virtual channel > + identifiers. > + > +allOf: > + - $ref: ../video-interface-devices.yaml# > + > +properties: > + compatible: > + const: thine,thp7312 > + > + reg: > + description: I2C device address You can skip description. It is obvious. > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + - description: CLKI clock input This was absolutely never tested. > + > + reset-gpios: > + maxItems: 1 > + description: |- > + Reference to the GPIO connected to the RESET_N pin, if any. > + Must be released (set high) after all supplies are applied. > + > + vddcore-supply: > + description: > + 1.2V supply for core, PLL, MIPI rx and MIPI tx. > + > + vhtermnx-supply: > + description: > + Supply for input (rx). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel. > + > + vddtx-supply: > + description: > + Supply for output (tx). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel. > + > + vddhost-supply: > + description: > + Supply for host interface. 1.8V, 2.8V, or 3.3V. > + > + vddcmos-supply: > + description: > + Supply for sensor interface. 1.8V, 2.8V, or 3.3V. > + > + vddgpio_0-supply: No, underscores are not allowed in names. > + description: > + Supply for GPIO_0. 1.8V, 2.8V, or 3.3V. > + > + vddgpio_1-supply: > + description: > + Supply for GPIO_1. 1.8V, 2.8V, or 3.3V. > + > + DOVDD-supply: lowercase. Look at your other supplies. VDD is spelled there "vdd", so do not introduce random style. > + description: > + Digital I/O (1.8V) supply for image sensor. > + > + AVDD-supply: lowercase > + description: > + Analog (2.8V) supply for image sensor. > + > + DVDD-supply: lowercase > + description: > + Digital Core (1.2V) supply for image sensor. > + > + orientation: true > + rotation: true > + > + thine,rx,data-lanes: Why are you duplicating properties? With wrong name? No, that's not a property of a device node, but endpoint. > + minItems: 4 > + maxItems: 4 > + $ref: /schemas/media/video-interfaces.yaml#data-lanes > + description: |- Drop |- where not needed. > + This property is for lane reordering between the THP7312 and the imaging > + sensor that it is connected to. > + > + port: > + $ref: /schemas/graph.yaml#/$defs/port-base > + additionalProperties: false > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + description: |- > + The sensor supports either two-lane, or four-lane operation. > + This property is for lane reordering between the THP7312 and > + the SoC. If this property is omitted four-lane operation is > + assumed. For two-lane operation the property must be set to <1 2>. > + minItems: 2 > + maxItems: 4 > + items: > + maximum: 4 > + > +required: > + - compatible > + - reg > + - reset-gpios > + - clocks > + - vddcore-supply > + - vhtermrx-supply > + - vddtx-supply > + - vddhost-supply > + - vddcmos-supply > + - vddgpio_0-supply > + - vddgpio_1-supply > + - DOVDD-supply > + - AVDD-supply > + - DVDD-supply > + - thine,rx,data-lanes > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + camera@61 { > + compatible = "thine,thp7312"; > + reg = <0x61>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&cam1_pins_default>; > + > + reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>; > + clocks = <&camera61_clk>; > + > + vddcore-supply = <&vsys_v4p2>; > + AVDD-supply = <&vsys_v4p2>; > + DVDD-supply = <&vsys_v4p2>; Srlsy, test it before sending. Look how many supplies you require and what is provided here. How any of this could possibly work? Best regards, Krzysztof