On 01/09/2023 11:18, Krzysztof Kozlowski wrote:
Commit 704e26678c8d ("arm64: dts: qcom: apq8096-db820c: drop simple-bus
from clocks") removed "simple-bus" compatible from "clocks" node, but
one of the clocks - divclk1 - is a gpio-gate-clock, which does not have
CLK_OF_DECLARE. This means it will not be instantiated if placed in
some subnode. Move the clocks to the root node, so regular devices will
be populated.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Closes: https://lore.kernel.org/all/CAA8EJprF==p87oN+RiwAiNeURF1JcHGfL2Ez5zxqYPRRbN-hhg@xxxxxxxxxxxxxx/
Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: 704e26678c8d ("arm64: dts: qcom: apq8096-db820c: drop simple-bus from clocks")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Stephen Boyd pointed out that this is a proper way to go (and we should
unpack remaining /clocks nodes).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 32 ++++++++++-----------
1 file changed, 15 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 385b178314db..3067a4091a7a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -62,25 +62,23 @@ chosen {
stdout-path = "serial0:115200n8";
};
- clocks {
- divclk4: divclk4 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "divclk4";
+ div1_mclk: divclk1 {
+ compatible = "gpio-gate-clock";
+ pinctrl-0 = <&audio_mclk>;
+ pinctrl-names = "default";
+ clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+ #clock-cells = <0>;
+ enable-gpios = <&pm8994_gpios 15 0>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&divclk4_pin_a>;
- };
+ divclk4: divclk4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "divclk4";
- div1_mclk: divclk1 {
- compatible = "gpio-gate-clock";
- pinctrl-0 = <&audio_mclk>;
- pinctrl-names = "default";
- clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
- #clock-cells = <0>;
- enable-gpios = <&pm8994_gpios 15 0>;
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&divclk4_pin_a>;
};
gpio-keys {
--
With best wishes
Dmitry
