Re: [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On 05/09/2023 07:43, Rohit Agarwal wrote:

Add support for USB3 QMP PHY found in SDX75 platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
  drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 160 ++++++++++++++++++++++++++++++++
  1 file changed, 160 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index a49711c..f95d117 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -24,6 +24,7 @@
  #include "phy-qcom-qmp-pcs-misc-v3.h"
  #include "phy-qcom-qmp-pcs-usb-v4.h"
  #include "phy-qcom-qmp-pcs-usb-v5.h"
+#include "phy-qcom-qmp-pcs-usb-v6.h"
/* QPHY_SW_RESET bit */ 
  #define SW_RESET				BIT(0)
@@ -1066,6 +1067,134 @@ static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
  	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
  };
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_serdes_tbl[] = { 
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x2e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE1, 0x25),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE0, 0x25),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_BUF_ENABLE, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1, 0xb6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3, 0x37),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_TX, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_RX, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0xf5),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_3, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_4, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_5, 0x5f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_PI_QEC_CTRL, 0x21),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_PI_CONTROLS, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN2, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL1, 0x54),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_GM_CAL, 0x13),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CNTRL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_LOW, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xdf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xed),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_LOW, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH, 0x5c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH2, 0x9c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH3, 0x1d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH4, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_EN_TIMER, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DCC_CTRL1, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VTH_CODE, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_CTRL1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_TRIM, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1, 0x21),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RX_SIGDET_LVL, 0xaa),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_CDR_RESET_TIME, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG1, 0x4b),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG5, 0x10),
I'm probably going to send a patch removing the _USB_ part to follow the style of previous generations. 


+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_pcs_usb_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+};
+
  static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
  	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
  	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
@@ -1868,6 +1997,33 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
  	.has_pwrdn_delay	= true,
  };
+static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = { 
+	.lanes			= 1,
+	.offsets		= &qmp_usb_offsets_v5,


v6?


+
+	.serdes_tbl		= sdx75_usb3_uniphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_serdes_tbl),
+	.tx_tbl			= sdx75_usb3_uniphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_tx_tbl),
+	.rx_tbl			= sdx75_usb3_uniphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_rx_tbl),
+	.pcs_tbl		= sdx75_usb3_uniphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sdx75_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_usb_tbl),
+	.clk_list		= qmp_v4_sdx55_usbphy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
Please consider rebasing on top of https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@xxxxxxxxxx/ 


+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v5_usb3phy_regs_layout,


This must be qmp_v6_usb3phy_regs_layout.


+	.pcs_usb_offset		= 0x1000,
+
+	.has_pwrdn_delay	= true,
+
+};
+
  static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
  	.lanes			= 2,
@@ -1985,6 +2141,7 @@ static int qmp_usb_init(struct phy *phy) 
  	void __iomem *dp_com = qmp->dp_com;
  	int ret;
+ 
  	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
  	if (ret) {
  		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
@@ -2619,6 +2776,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
  		.compatible = "qcom,sdx65-qmp-usb3-uni-phy",
  		.data = &sdx65_usb3_uniphy_cfg,
  	}, {
+		.compatible = "qcom,sdx75-qmp-usb3-uni-phy",
+		.data = &sdx75_usb3_uniphy_cfg,
+	}, {
  		.compatible = "qcom,sm6115-qmp-usb3-phy",
  		.data = &qcm2290_usb3phy_cfg,
  	}, {


--
With best wishes
Dmitry
[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]

  Powered by Linux