Extend device tree bindings to support drive strength configuration for the ksz* switches. Introduced properties: - microchip,hi-drive-strength-microamp: Controls the drive strength for high-speed interfaces like GMII/RGMII and more. - microchip,lo-drive-strength-microamp: Governs the drive strength for low-speed interfaces such as LEDs, PME_N, and others. Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> --- .../bindings/net/dsa/microchip,ksz.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index e51be1ac03623..97d655eb01b6f 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -49,6 +49,22 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + microchip,hi-drive-strength-microamp: + description: + High Speed Drive Strength. Controls drive strength of GMII / RGMII / + MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines. + minimum: 2000 + maximum: 28000 + default: 24000 + + microchip,lo-drive-strength-microamp: + description: + Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI, + COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines. + minimum: 2000 + maximum: 28000 + default: 8000 + required: - compatible - reg -- 2.39.2