Some devices use tertiary mi2s to connect external audio codec. Add it near the other two i2s pinctrl definitions so the devices don't have to duplicate it. Signed-off-by: Nikita Travkin <nikita@xxxxxxx> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index a79c0f2e1879..9f68b5ff0030 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2033,6 +2033,11 @@ sec_mi2s_active: sec-mi2s-active-state { function = "mi2s_1"; }; + ter_mi2s_active: ter-mi2s-active-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66"; + function = "mi2s_2"; + }; + pri_mi2s_active: pri-mi2s-active-state { pins = "gpio53", "gpio54", "gpio55", "gpio56"; function = "mi2s_0"; -- 2.41.0