Some devices use tertiary mi2s to connect external audio codec.
Add it near the other two i2s pinctrl definitions so the devices don't
have to duplicate it.
Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a79c0f2e1879..9f68b5ff0030 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2033,6 +2033,11 @@ sec_mi2s_active: sec-mi2s-active-state {
function = "mi2s_1";
};
+ ter_mi2s_active: ter-mi2s-active-state {
+ pins = "gpio63", "gpio64", "gpio65", "gpio66";
+ function = "mi2s_2";
+ };
+
pri_mi2s_active: pri-mi2s-active-state {
pins = "gpio53", "gpio54", "gpio55", "gpio56";
function = "mi2s_0";
--
2.41.0
