Re: [PATCH] ARM: dts: Bump SD card pin drive strength up on rk3288-evb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Am Mittwoch, 10. Dezember 2014, 12:55:29 schrieb Doug Anderson:
> It seems that ever since (536f6b9 mmc: dw_mmc: Reset DMA before
> enabling IDMAC) landed upstream that SD cards have been very unhappy
> on rk3288-evb.  They were a little unhappy before that change, but
> after that change they're REALLY unhappy.
> 
> It turns out that the above fix happens to fix a corruption when
> reading card information during probe time.  Without the fix we didn't
> detect that high speed SD cards could actually support high speed.
> With the fix we suddenly detect that they're high speed and we try to
> use them at 50MHz.  That doesn't work so well on EVB with the default
> drive strength (maybe because there are two physical SD card slots
> hooked up to the same pin?).
> 
> Fix the problem by bumping up the drive strength of the sdmmc lines.
> 
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> Fixes: 536f6b91d21b ("mmc: dw_mmc: Reset DMA before enabling IDMAC")

applied to my 3.19 dts-fixes branch
(after a slight modification of the subject: please use "ARM: dts: rockchip:")


Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux