Document the device-tree bindings for Realtek SoCs Type-C. Realtek DHC (digital home center) RTD SoCs support a Type-C module. Signed-off-by: Stanley Chang <stanley_chang@xxxxxxxxxxx> --- v2 to v3 change: changed the commit message (extcon to usb) v1 to v2 change: 1. moved this binding from extcon to usb. 2. removed the property of pinctrl. 3. revised the properties of nvmem and gpio. 4. added connector node. 5. revised the example. --- .../bindings/usb/realtek,rtd-type-c.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml diff --git a/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml new file mode 100644 index 000000000000..6142b0b5b534 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/realtek,rtd-type-c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD SoCs USB Type-C Connector detection + +maintainers: + - Stanley Chang <stanley_chang@xxxxxxxxxxx> + +description: + Realtek digital home center (DHC) RTD series SoCs include a type c module. + This module is able to detect the state of type c connector. + +properties: + compatible: + enum: + - realtek,rtd1295-type-c + - realtek,rtd1312c-type-c + - realtek,rtd1315e-type-c + - realtek,rtd1319-type-c + - realtek,rtd1319d-type-c + - realtek,rtd1395-type-c + - realtek,rtd1619-type-c + - realtek,rtd1619b-type-c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nvmem-cell-names: + items: + - const: usb-cal + + nvmem-cells: + maxItems: 1 + description: + The phandle to nvmem cell that contains the trimming data. + The type c parameter trimming data specified via efuse. + If unspecified, default value is used. + + realtek,rd-ctrl-gpios: + description: The gpio node to control external Rd on board. + maxItems: 1 + + connector: + $ref: /schemas/connector/usb-connector.yaml# + description: Properties for usb c connector. + type: object + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + type-c@7220 { + compatible = "realtek,rtd1619b-type-c"; + reg = <0x7220 0x20>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb_cc1_pins>, <&usb_cc2_pins>; + nvmem-cells = <&otp_usb_cal>; + nvmem-cell-names = "usb-cal"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + }; + }; -- 2.34.1
